メインコンテンツにスキップ
ヘルプ

現在のバージョン作成者: oldturkey03 ,

タイトル:

How to repair flexible ribbon interconnects

テキスト:

[image|1272215]

The camera I'm working on (Panasonic Lumix DMC-TZ35 - not available from the list) has one of the usual flexible ribbon interconnects connecting the lens motors and sensors to the main logic board. I get no continuity between the zoom motor (beneath the ribbon) and the corresponding connector pads and I suspect the track is fractured at the fold (ringed) in one of the spurs.

Repair is going to be difficult. The only way I can think of is to remove the insulating film covering the copper either side of the fold and solder wires to it to bridge the fracture.

But what can I use to remove the insulating film without damaging the track underneath?

デバイス:

Panasonic Lumix DMC-TZ10Camera
Panasonic Lumix DMC-TZ10Camera

ステータス:

open

オリジナル投稿者: Philip Le Riche ,

タイトル:

How to repair flexible ribbon interconnects

テキスト:

[image|1272215]

The camera I'm working on (Panasonic Lumix DMC-TZ35 - not available from the list) has one of the usual flexible ribbon interconnects connecting the lens motors and sensors to the main logic board. I get no continuity between the zoom motor (beneath the ribbon) and the corresponding connector pads and I suspect the track is fractured at the fold (ringed) in one of the spurs.

Repair is going to be difficult. The only way I can think of is to remove the insulating film covering the copper either side of the fold and solder wires to it to bridge the fracture.

But what can I use to remove the insulating film without damaging the track underneath?

デバイス:

Panasonic Lumix DMC-TZ10

ステータス:

open