メインコンテンツにスキップ
ヘルプ

現在のバージョン作成者: mayer (投票の詳細) ,

タイトル:

Powermac G5 won't power on, no white power led, fans spin however.

テキスト:

I recently bought an older powermac g5 2.0 DP. Cleaned it, checked if it worked, it did.
I put in new ram (4GB DDR1) And then nothing. When i press the power button the white led does not stay on (And no blinking) No video, nothing. Putted the old ram back in, same problem. However i do get two ''sighs'' from the fans, and they ramp up to max after approx 10 ~ 15 mins. Also there is a red led right behind the top CPU? (cpu dead?)
-
+
Unplugged everything, tried resetting the logic board etc. still nothing.
Any ideas?
Thanks in advance,

デバイス:

Power Mac G5

ステータス:

open

アンサーフォーラムの回答が承認:

+435821

編集者: Sander ,

タイトル:

Powermac G5 won't power on, no white power led, fans spin however.

テキスト:

I recently bought an older powermac g5 2.0 DP. Cleaned it, checked if it worked, it did.
-I put in new ram (4GB DDR1) And then nothing. When i press the power button the white led does not stay on (And no blinking) No video, nothing. Putted the old ram back in, same problem. However i do get two ''sighs'' from the fans, and they ramp up to max after approx 10 ~ 15 mins.
-
+I put in new ram (4GB DDR1) And then nothing. When i press the power button the white led does not stay on (And no blinking) No video, nothing. Putted the old ram back in, same problem. However i do get two ''sighs'' from the fans, and they ramp up to max after approx 10 ~ 15 mins. Also there is a red led right behind the top CPU? (cpu dead?)
+
Unplugged everything, tried resetting the logic board etc. still nothing.
Any ideas?
Thanks in advance,

デバイス:

Power Mac G5

ステータス:

open

オリジナル投稿者: Sander ,

タイトル:

Powermac G5 won't power on, no white power led, fans spin however.

テキスト:

I recently bought an older powermac g5 2.0 DP. Cleaned it, checked if it worked, it did.

I put in new ram (4GB DDR1) And then nothing. When i press the power button the white led does not stay on (And no blinking) No video,  nothing. Putted the old ram back in, same problem. However i do get two ''sighs'' from the fans, and they ramp up to max after approx 10 ~ 15 mins.

Unplugged everything, tried resetting the logic board etc. still nothing.

Any ideas?

Thanks in advance,

デバイス:

Power Mac G5

ステータス:

open