メインコンテンツにスキップ
ヘルプ

現在のバージョン作成者: mayer (投票の詳細) ,

タイトル:

How do you repair torn ground foil on the logic board?

テキスト:

Just received the new logic board for my 5.5 and was able to take everything apart following the how-to document.  My only issue was that the Foil removal from the old bard and re-install on the new board was not discussed...or I missed it.  Of course I was not careful enough and the the thin lead that goes to the case for ground has torn.

How do I fix it?

As a dosumentation suggestion:

Looks like either here:

[guide|615|page=6]

or at Step 19 (Or new Step 20), we need to instruct on how to remove said foil.

I found that after mistakenly pulling the ground tab piece (which casued the foil break) that peeling up on the round (white underlayment) from the base-end of the logic board is the best method as it does not put stress on the foil itself.

デバイス:

iPod 5th Generation (Video)

ステータス:

open

承認済み回答:

43223

編集者: Andrew Optimus Goldheart ,

タイトル:

How do you repair torn ground foil on the logic board?

テキスト:

Just received the new logic board for my 5.5 and was able to take everything apart following the how-to document.  My only issue was that the Foil removal from the old bard and re-install on the new board was not discussed...or I missed it.  Of course I was not careful enough and the the thin lead that goes to the case for ground has torn.

How do I fix it?

As a dosumentation suggestion:

Looks like either here:

[guide|615|page=6]

or at Step 19 (Or new Step 20), we need to instruct on how to remove said foil.

I found that after mistakenly pulling the ground tab piece (which casued the foil break) that peeling up on the round (white underlayment) from the base-end of the logic board is the best method as it does not put stress on the foil itself.

デバイス:

iPod 5th Generation Video(Video)
iPod 5th Generation Video(Video)

ステータス:

open

オリジナル投稿者: mbivona ,

タイトル:

How do you repair torn ground foil on the logic board?

テキスト:

Just received the new logic board for my 5.5 and was able to take everything apart following the how-to document.  My only issue was that the Foil removal from the old bard and re-install on the new board was not discussed...or I missed it.  Of course I was not careful enough and the the thin lead that goes to the case for ground has torn.

How do I fix it?

As a dosumentation suggestion:

Looks like either here:

[guide|615|page=6]

or at Step 19 (Or new Step 20), we need to instruct on how to remove said foil.

I found that after mistakenly pulling the ground tab piece (which casued the foil break) that peeling up on the round (white underlayment) from the base-end of the logic board is the best method as it does not put stress on the foil itself.

デバイス:

iPod 5th Generation Video

ステータス:

open