メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

ヘルプ

オリジナル投稿者: Gervase Henson ,

テキスト:

I had the same problem,  no water flow after replacing the filter.  Tracked my problem down.  The supply line I used has an "anti flood valve" built into it.  The little bit of water hammer after the filter change caused it to active.  The solution- unhook the water supply at the shut off valve (which resets the valve) then reconnect it.  Problem solved. I now have water!

I suspect most new refrigerators have some form of similar protection.  Hope this helps those that have this problem in the future!

ステータス:

open