オリジナル投稿者： Minho ,
If you could attach a picture, that would be very helpful. Normally, I would not work on the "frame" with the glass in place, otherwise you risk cracking the glass (digitizer). Ideally, you should remove the digitizer, re-shape the frame and then re-install the digitizer. You could [guide|11968|follow this guide] to remove the digi. In a perfect world, you would remove the glass without breaking it. However, if it's not done correctly (insufficient heat) it will break. The opposite is also true...too much heat can damage the board. In the guide there are links to the parts you will need. To reshape the frame, I like to [https://www.fixez.com/categories/repair-tools/iphone-repair-tools/metal-opening-tool|use this tool] with a small hammer. Be careful, the aluminum housing can break very easily. iPads are much harder to fix properly than iPhones. Consider you skill and experience level and how much you want to learn versus how much you want to spend.