メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

ヘルプ

オリジナル投稿者: AlnoWilton ,

テキスト:

I am surprised by some of the answers that are posted.

Here is the problem and how to AVOID it.

The filter head assembly has a nipple sticking out in the spot that water will come into the filter. This nipple will be pushed out by the water pressure behind it to stop the water coming out when there is no filter mounted.

When you  mount the filter it will push that nipple in slightly and allow the water to flow through your filter, in this process you can damage that nipple and it will not  be pushed in, so water will not flow(or flow is reduced) unless you change the filter head assembly.

Solution: before changing the filter shot off the water AND eliminate the water pressure by turning on a cold water faucet.

This way your filter will not damage the nipple in the filter head assembly.

By

ALNO WILTON

ステータス:

open