メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

ヘルプ

現在のバージョン作成者: mayer ,

テキスト:

I didn't see anywhere a suggestion for replacing the logic board. If it boots from the G5 installed system external firewire drive, thatuse that drive and install it. If it's a 3.5" drive clone it.
I didn't see anywhere a suggestion for replacing the logic board. If it boots from the G5 installed system external firewire drive, thatuse that drive and install it. If it's a 3.5" drive clone it.
 
First boot from the external and go to "about this mac" and see if the internal hard drive or optical drives are seen. If not, replace the internal drive, boot from the external and use SuperDuper to clone it after you have formatted it. http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
I
I
do not see a guide to replace the hard drive specifically but this guide will get you there: http://www.ifixit.com/Guide/Repair/Installing-PowerBook-G4-Aluminum-12-Inch-867-MHz-Logic-Board/213/9[guide|213|page=9]
I
I
do not see a guide to replace the hard drive specifically but this guide will get you there: http://www.ifixit.com/Guide/Repair/Installing-PowerBook-G4-Aluminum-12-Inch-867-MHz-Logic-Board/213/9[guide|213|page=9]

ステータス:

open

編集者: mayer ,

テキスト:

I didn't see anywhere a suggestion for replacing the logic board. If it boots from the G5 installed system external firewire drive, that that drive and install it. If it's a 3.5" drive clone it.
 
First boot from the external and go to "about this mac" and see if the internal hard drive or optical drives are seen. If not, replace the internal drive, boot from the external and use SuperDuper to clone it after you have formatted it. http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
I do not see a guide to replace the hard drive specifically but this guide will get you there: http://www.ifixit.com/Guide/Repair/Installing-PowerBook-G4-Aluminum-12-Inch-867-MHz-Logic-Board/213/9

ステータス:

open

オリジナル投稿者: mayer ,

テキスト:

I didn't see anywhere a suggestion for replacing the logic board.  If it boots from the G5 installed system external firewire drive, that that drive and install it.  If it's a 3.5" drive clone it.

First boot from the external and go to "about this mac" and see if the internal hard drive or optical drives are seen.  If not, replace the internal drive, boot from the external and use SuperDuper to clone it after you have formatted it.  http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html

ステータス:

open