メインコンテンツにスキップ
ヘルプ

オリジナル投稿者: retlaw132002 ,

テキスト:

there is a method that uses a pattern of tightening the spokes and you have to get the pattern from who ever made that rim some use a four spoke pattern while some use a three spoke pattern and the easiest way to get to your spokes is take the tire off the rim and take the rubber used to protect your tube off and the top of the spokes has a standard  screw driver slot that way you can mark the spokes with a marker of the pattern you need to follow and you can use a cordless drill and this way is much faster than a spoke tool that's my opinion any way  hope this helps you good luck this is not a easy task thanks Matthew Walter Phx Az

ステータス:

open