メインコンテンツにスキップ
ヘルプ

オリジナル投稿者: Seji the veggie ,

テキスト:

This'll void the crap out of any warranty that may possibly exist, in case you didn't know that.

For the oven, '''you'll have to gut the entire thing and remove the logic board'''. Remove all the plastic coverings that you can. For oven solder reflowing:

1. Make sure you never intend to use the oven for food again. The gases and substances released can be toxic.

2. Line the tray with foil, shiny side up (foil has a shiny side and a dull matte side). Create four tiny foil balls, and use them to hold the logic board off of the surface. Make sure that there aren't any board components touching the aluminum foil balls.

3. Bake for about 15 minutes at 385 degrees fahrenheit. If it didn't properly reflow, try at 400. Go no higher than 450.

Hope this helps.

ステータス:

open