メインコンテンツにスキップ
ヘルプ

オリジナル投稿者: Jason Mallet ,

タイトル:

iPhone 6 logic board, can I reflow solder in an oven?

テキスト:

I have an iPhone 6 that started boot looping.  It will boot randomly, apple logo, then a second of grey fuzzy screen, then loop.  Sometimes it just reboots.  After a teardown, I am certain it is the logic board.  Slight pressure on the board around the SIM dock resolved the issue.  I get panic entries with bug 210, and reboot entries with bug 115.  I strongly believe the board got bent.  Kids get a hold of it a lot and I noticed and bend in the chassis.  I tried to spot-heat with a heat gun after stripping the motherboard as bare as you can; it worked for 2 days then looped again.  I would like to reflow the board at 385 degrees, but can't find any good information on anyone attempting to reflow with and oven on an iPhone 6 logic board.  I am afraid to damage the plastic connectors or something else.  Advice?

デバイス:

iPhone 6

ステータス:

open