メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

ヘルプ

現在のバージョン作成者: jayeff ,

テキスト:

Hi,
 
This is just a general check list, applicable to a lot of laser printers.
 
1. Remove the power cord.
 
2. Open the front cover and remove and reinsert the cartridges.
 
3. Before you close the front cover, (not quite sure if this is applicable to your model or not) check to see if there is any kind of 'safety switch '- (maybe attached to the latch perhaps), which would be operated by the cover being closed. If there is it may be that it has become dislodged or disconnected.
3. Before you close the front cover, (not quite sure if this is applicable to your model or not) check to see if there is any kind of 'safety switch '- (maybe attached to the latch perhaps), which would be operated by the cover being closed. If there is it may be that it has become dislodged or disconnected.
 
4. Ensure that the front cover is closed securely.
 
5. Reconnect the power cord and switch on the printer.

ステータス:

open

編集者: jayeff ,

テキスト:

Hi,
 
This is just a general check list, applicable to a lot of laser printers.
 
1. Remove the power cord.
 
2. Open the front cover and remove and reinsert the cartridges.
 
3. Before you close the front cover, (not quite sure if this is applicable to your model or not) check to see if there is any kind of 'safety switch '- (maybe attached to the latch perhaps) which would be operated by the cover being closed. ItIf there is it may be that it has become dislodged or disconnected.
3. Before you close the front cover, (not quite sure if this is applicable to your model or not) check to see if there is any kind of 'safety switch '- (maybe attached to the latch perhaps) which would be operated by the cover being closed. ItIf there is it may be that it has become dislodged or disconnected.
 
4. Ensure that the front cover is closed securely.
 
5. Reconnect the power cord and switch on the printer.

ステータス:

open

オリジナル投稿者: jayeff ,

テキスト:

Hi,

This is just a general check list, applicable to a lot of laser printers.

1. Remove the power cord.

2. Open the front cover and remove and reinsert the cartridges.

3. Before you close the front cover, (not quite sure if this is applicable to your model or not) check to see if there is any kind of 'safety switch '- (maybe attached to the latch perhaps) which would be operated by the cover being closed. It there is it may be that it has become dislodged or disconnected.

4. Ensure that the front cover is closed securely.

5. Reconnect the power cord and switch on the printer.

ステータス:

open