メインコンテンツにスキップ
ヘルプ

現在のバージョン作成者: M Coram ,

タイトル:

Jura J5 Interesting problem with no water and no Fault!

テキスト:

Hi All. I have purchased a Jura J5, with a fault. Well technically it dosnt show a fault.
 
Original owner said was running fine then one day was leaking water from the bottom. and no water/coffee brew was coming out of the nozzles. The original purchaser (a company) gave it to an employee and bought a new one.
Original owner said was running fine then one day was leaking water from the bottom. and no water/coffee brew was coming out of the nozzles. The original purchaser (a company) gave it to an employee and bought a new one.
 
The employee tore it down and changed a piece of tubeing (i dont know which one) and now now it dosnt work. He sold it to me for $50.00.
The employee tore it down and changed a piece of tubeing (i dont know which one) and now now it dosnt work. He sold it to me for $50.00.
 
You turn it on and it does its normal thing. It starts up and when it says ready, it grins beans drops it in the brew group, compresses it and dumps it in the waste tray all dryalmost dry and no water from the nozzels at all. Capp Spout is working fine with water etc. The nozzels you can hear it burbling, but nothing comes out. The machine is now leaking hot clean water all over the bench.
You turn it on and it does its normal thing. It starts up and when it says ready, it grins beans drops it in the brew group, compresses it and dumps it in the waste tray all dryalmost dry and no water from the nozzels at all. Capp Spout is working fine with water etc. The nozzels you can hear it burbling, but nothing comes out. The machine is now leaking hot clean water all over the bench.
 
You can hear, that the machine is doing exactly and sounding exactly as it should. the pump is going the grinder is going etc.
 
so its on my bench torn down from your instructions on this site which are blinking brilliant! thankyou thankyou thankyou.
 
Before (and still now if i put it back together) there is no fault code.
 
So everything is working as normal, but i think maybe he has a hose backwards? I can see water drain from the carriage into the tube but somewhere along the process the water dosnt get to the brew group. ThereThere is no obvious blockage. There is no damaged pipes that i can see, no water leaking now anywhere.
So everything is working as normal, but i think maybe he has a hose backwards? I can see water drain from the carriage into the tube but somewhere along the process the water dosnt get to the brew group. ThereThere is no obvious blockage. There is no damaged pipes that i can see, no water leaking now anywhere.
 
Right so the interesting thing is: when i dissassembled the machine I found two things.
Right so the interesting thing is: when i dissassembled the machine I found two things.
 
Step one two and three show a white formed plastic part with a hose attached. I dont have that. neither the hose or the white plasticeplastic part or the nozzle that attaches the hose to the brew group. I just have a arm that goes over the big hole in the top of the brew group. There is a spot that a hose joiner can go, but there is not one there. (if i can upload a photo i will¬!)
Step one two and three show a white formed plastic part with a hose attached. I dont have that. neither the hose or the white plasticeplastic part or the nozzle that attaches the hose to the brew group. I just have a arm that goes over the big hole in the top of the brew group. There is a spot that a hose joiner can go, but there is not one there. (if i can upload a photo i will¬!)
 
[guide|15924|Link to tear down]
 
also on step ten show a hose from the drainage valve. I do not have one. (as a question, if the drainage valve was taken apart (which i dont think the brew group was taken out before as its screws look perfect and untouched not like the other side of the machine where you can see they have been undone). but if the drainage valve was taken apart and somehow put backwards would that stop the flow of water?)
 
If I had a hose diagram i would be able to check where it is routed wrongly!
 
At present i can trace the water tubing from one item in the machine to the other, and all looks same in the images on the teardown that i can see. I can only assume it is from the very point that the water has to go into the brew group?? I can see a position where the drainage valve at the bottom of the brew group lodges into a socket that goes to the other side of the machine. I (think) that is where the water comes from?
 
Ok. Well Heres hoping all will be well, i dont have enough experience with how the machine is working to know where to look next. any ideas and also advise would be greatly appreaciated!
 
thanks again.

デバイス:

Jura Capresso IMPRESSA J5

ステータス:

open

編集者: M Coram ,

タイトル:

Jura J5InterestingJ5 Interesting problem with no water and no Fault!
Jura J5InterestingJ5 Interesting problem with no water and no Fault!

テキスト:

Hi All. I have purchased a Jura J5, with a fault. Well technically it dosnt show a fault.
 
Original owner said was running fine then one day was leaking water from the bottom. and no water/coffee brew was coming out of the nozzles. The original purchaser (a company) gave it to an employee and bought a new one. The employee tore it down and changed a piece of tubeing (i dont know which one) and now now it dosnt work. He sold it to me for $50.00.
Original owner said was running fine then one day was leaking water from the bottom. and no water/coffee brew was coming out of the nozzles. The original purchaser (a company) gave it to an employee and bought a new one. The employee tore it down and changed a piece of tubeing (i dont know which one) and now now it dosnt work. He sold it to me for $50.00.
 
so its on my bench tornThe employee tore it down from your instructions aboveand changed a piece of tubeing (i dont know which one) and now now it dosnt work. He sold it to me for $50.00.
so its on my bench tornThe employee tore it down from your instructions aboveand changed a piece of tubeing (i dont know which one) and now now it dosnt work. He sold it to me for $50.00.
 
Before (and still now if i putYou turn it back together) there ison and it does its normal thing. It starts up and when it says ready, it grins beans drops it in the brew group, compresses it and dumps it in the waste tray all dry and no fault codewater from the nozzels at all.
Before (and still now if i putYou turn it back together) there ison and it does its normal thing. It starts up and when it says ready, it grins beans drops it in the brew group, compresses it and dumps it in the waste tray all dry and no fault codewater from the nozzels at all.
 
You turn it oncan hear, that the machine is doing exactly and sounding exactly as it doesshould. the pump is going the grinder is going etc.

so
its normal thing. It starts up and whenon my bench torn down from your instructions on this site which are blinking brilliant! thankyou thankyou thankyou.

Before (and still now if i put
it says ready, it grins beans drops it in the brew group, compresses it and dumps it in the waste tray all dryback together) there is no fault code.
You turn it oncan hear, that the machine is doing exactly and sounding exactly as it doesshould. the pump is going the grinder is going etc.

so
its normal thing. It starts up and whenon my bench torn down from your instructions on this site which are blinking brilliant! thankyou thankyou thankyou.

Before (and still now if i put
it says ready, it grins beans drops it in the brew group, compresses it and dumps it in the waste tray all dryback together) there is no fault code.
 
So everything is working as normal, but i think maybe he has a hose backwards? I can see water drain from the carriage into the tube but somewhere along the process the water dosnt get to the brew group. There is no obvious blockage. There is no damaged pipes that i can see, no water leaking now anywhere.
So everything is working as normal, but i think maybe he has a hose backwards? I can see water drain from the carriage into the tube but somewhere along the process the water dosnt get to the brew group. There is no obvious blockage. There is no damaged pipes that i can see, no water leaking now anywhere.
 
Right so the interesting thing is: when i dissassembled the machine I found two things. On the image of the
Right so the interesting thing is: when i dissassembled the machine I found two things. On the image of the
 
Step one two and three show a white formed plastic part with a hose attached. I dont have that. neither the hose or the white plastice part or the nozzle that attaches the hose to the brew group. I just have a arm that goes over the big hole in the top of the brew group. There is a spot that a hose joiner can go, but there is not one there. (if i can upload a photo i will¬!)
Step one two and three show a white formed plastic part with a hose attached. I dont have that. neither the hose or the white plastice part or the nozzle that attaches the hose to the brew group. I just have a arm that goes over the big hole in the top of the brew group. There is a spot that a hose joiner can go, but there is not one there. (if i can upload a photo i will¬!)
 
[guide|15924|Link to tear down]
 
also on step ten show a hose from the drainage valve. I do not have one. (as a question, if the drainage valve was taken apart (which i dont think the brew group was taken out before as its screws look perfect and untouched not like the other side of the machine where you can see they have been undone). but if the drainage valve was taken apart and somehow put backwards would that stop the flow of water?)
also on step ten show a hose from the drainage valve. I do not have one. (as a question, if the drainage valve was taken apart (which i dont think the brew group was taken out before as its screws look perfect and untouched not like the other side of the machine where you can see they have been undone). but if the drainage valve was taken apart and somehow put backwards would that stop the flow of water?)
 
If I had a hose diagram i would be able to check where it is routed wrongly!
 
At present i can trace the water tubing from one item in the machine to the other, and all looks same in the images on the teardown that i can see. I can only assume it is from the very point that the water has to go into the brew group?? I can see a position where the drainage valve at the bottom of the brew group lodges into a socket that goes to the other side of the machine. I (think) that is where the water comes from?
At present i can trace the water tubing from one item in the machine to the other, and all looks same in the images on the teardown that i can see. I can only assume it is from the very point that the water has to go into the brew group?? I can see a position where the drainage valve at the bottom of the brew group lodges into a socket that goes to the other side of the machine. I (think) that is where the water comes from?
 
Ok. Well Heres hoping all will be well, i dont have enough experience with how the machine is working to know where to look next. any ideas and also advise would be greatly appreaciated!
 
thanks again.

デバイス:

Jura Capresso IMPRESSA J5

ステータス:

open

オリジナル投稿者: M Coram ,

タイトル:

Jura J5Interesting problem with no water and no Fault!

テキスト:

Hi All.  I have purchased a Jura J5, with a fault.  Well technically it dosnt show a fault.

Original owner said was running fine then one day was leaking water from the bottom.  and no water/coffee brew was coming out of the nozzles.  The original purchaser (a company) gave it to an employee and bought a new one.  The employee tore it down and changed a piece of tubeing (i dont know which one) and now now it dosnt work.  He sold it to me for $50.00.

so its on my bench torn down from your instructions above.

Before (and still now if i put it back together) there is no fault code.

You turn it on and it does its normal thing.  It starts up and when it says ready, it grins beans drops it in the brew group, compresses it and dumps it in the waste tray all dry.

So everything is working as normal, but i think maybe he has a hose backwards?  I can see water drain from the carriage into the tube but somewhere along the process the water dosnt get to the brew group.

Right so the interesting thing is:  when i dissassembled the machine I found two things.  On the image of the

Step one two and three show a white formed plastic part with a hose attached.  I dont have that.

[guide|15924|Link to tear down]

also on step ten show a hose from the drainage valve.  I do not have one.

If I had a hose diagram i would be able to check where it is routed wrongly!

At present i can trace the water tubing from one item in the machine to the other, and all looks same in the images on the teardown that i can see.  I can only assume it is from the very point that the water has to go into the brew group??

Ok.  Well Heres hoping all will be well, i dont have enough experience with how the machine is working to know where to look next. any ideas and also advise would be greatly appreaciated!

thanks again.

デバイス:

Jura Capresso IMPRESSA J5

ステータス:

open