メインコンテンツにスキップ
ヘルプ

現在のバージョン作成者: Dan ,

テキスト:

On the most part you should use the correctcorrectly sized drive for your system. In this case a 3.5" for the primary HD. Yes, one can put a 2.5" drive in as a secondary drive but you really can't use it as the primary.
On the most part you should use the correctcorrectly sized drive for your system. In this case a 3.5" for the primary HD. Yes, one can put a 2.5" drive in as a secondary drive but you really can't use it as the primary.
 
Apple uses an internal thermal sensor inside the HD to monitor the systems heat buildup to control the systems cooling. A 2.5" drive doesn't offer the needed connection for the SMC service as such the fans will go into over driveoverdrive as its missing the sensor it requires.
Apple uses an internal thermal sensor inside the HD to monitor the systems heat buildup to control the systems cooling. A 2.5" drive doesn't offer the needed connection for the SMC service as such the fans will go into over driveoverdrive as its missing the sensor it requires.
 
One of the issuesproblems you face in this series is the special cable the different drives requirerequire based on the manufacture. Please review the IFIXIT guide: [guide|1634|iMac Intel 27" EMC 2309 and 2374 Hard Drive Replacement]. Jump down to Step10. The issue is are you replacing with the same manufactures drive orif not you'll need to swap out the sensor cable with the correct cable.
One of the issuesproblems you face in this series is the special cable the different drives requirerequire based on the manufacture. Please review the IFIXIT guide: [guide|1634|iMac Intel 27" EMC 2309 and 2374 Hard Drive Replacement]. Jump down to Step10. The issue is are you replacing with the same manufactures drive orif not you'll need to swap out the sensor cable with the correct cable.
 
You'll need this cable: [http://eshop.macsales.com/item/OWC/DIDIMACHDD09/|OWC In-line Digital Thermal Sensor for iMac 2009-2010 Hard Drive Upgrade] or the correct Apple cable for the drive.

ステータス:

open

編集者: Dan ,

テキスト:

On the most part you should use the correct sized drive for your system. In this case a 3.5" for the primary HD. Yes, one can put a 2.5" drive in as a secondary drive but you really can't use it as the primary.
 
Apple uses an internal thermal sensor inside the HD to monitor the systems heat buildup to control the systems cooling. A 2.5" drive doesn't offer the needed connection for the SMC service as such the fans will go into over drive as its missing the sensor it requires.
 
One of the issues you face in this series is the special cable the different drives require. Please review the IFIXIT guide: [guide|1634|iMac Intel 27" EMC 2309 and 2374 Hard Drive Replacement]. Jump down to Step10. The issue is replacing with the same manufactures drive or you'll need to swap out the sensor cable with the correct cable.
 
You'll need this cable: [http://eshop.macsales.com/item/OWC/DIDIMACHDD09/|OWC In-line Digital Thermal Sensor for iMac 2009-2010 Hard Drive Upgrade] or the correct Apple cable for the drive.
You'll need this cable: [http://eshop.macsales.com/item/OWC/DIDIMACHDD09/|OWC In-line Digital Thermal Sensor for iMac 2009-2010 Hard Drive Upgrade] or the correct Apple cable for the drive.

ステータス:

open

編集者: Dan ,

テキスト:

On the most part you should use the correct sized drive for your system. In this case a 3.5" for the primary HD. Yes, one can put a 2.5" drive in as a secondary drive but you really can't use it as the primary.
On the most part you should use the correct sized drive for your system. In this case a 3.5" for the primary HD. Yes, one can put a 2.5" drive in as a secondary drive but you really can't use it as the primary.
 
Apple uses an internal thermal sensor inside the HD to monitor the systems heat buildup to control the systems cooling. A 2.5" drive doesn't offer the needed connection for the SMC service as such the fans will go into over drive as its missing the sensor it requires.
 
One of the issues you face in this series is the special cable the different drives require. Please review the IFIXIT guide: [https://www.ifixit.com/Guide/iMac+Intel+27-Inch+EMC+2309+and+2374+Hard+Drive+Replacement/1634|iMacguide|1634|iMac Intel 27" EMC 2309 and 2374 Hard Drive Replacement]. Jump down to Step10. The issue is replacing with the same manufactures drive or you'll need to swap out the sensor cable with the correct cable.

You'll need this cable: [http://eshop.macsales.com/item/OWC/DIDIMACHDD09/|OWC In-line Digital Thermal Sensor for iMac 2009-2010 Hard Drive Upgrade]
One of the issues you face in this series is the special cable the different drives require. Please review the IFIXIT guide: [https://www.ifixit.com/Guide/iMac+Intel+27-Inch+EMC+2309+and+2374+Hard+Drive+Replacement/1634|iMacguide|1634|iMac Intel 27" EMC 2309 and 2374 Hard Drive Replacement]. Jump down to Step10. The issue is replacing with the same manufactures drive or you'll need to swap out the sensor cable with the correct cable.

You'll need this cable: [http://eshop.macsales.com/item/OWC/DIDIMACHDD09/|OWC In-line Digital Thermal Sensor for iMac 2009-2010 Hard Drive Upgrade]

ステータス:

open

編集者: Dan ,

テキスト:

On the most part you should use the correct sized drive for your system. In this case a 3.5" for the primary HD. Yes, one can put a 2.5" drive in as a secondary drive but you really can't use it as the primary.

Apple uses an internal thermal sensor inside the HD to monitor the systems heat buildup to control the systems cooling. A 2.5" drive doesn't offer the needed connection for the SMC service as such the fans will go into over drive as its missing the sensor it requires.

One of the issues you face in this series is the special cable the different drives require. Please review the IFIXIT guide: [https://www.ifixit.com/Guide/iMac+Intel+27-Inch+EMC+2309+and+2374+Hard+Drive+Replacement/1634|iMac Intel 27" EMC 2309 and 2374 Hard Drive Replacement]. Jump down to Step10. The issue is replacing with the same manufactures drive or you'll need to swap out the sensor cable with the correct cable.
On the most part you should use the correct sized drive for your system. In this case a 3.5" for the primary HD. Yes, one can put a 2.5" drive in as a secondary drive but you really can't use it as the primary.

Apple uses an internal thermal sensor inside the HD to monitor the systems heat buildup to control the systems cooling. A 2.5" drive doesn't offer the needed connection for the SMC service as such the fans will go into over drive as its missing the sensor it requires.

One of the issues you face in this series is the special cable the different drives require. Please review the IFIXIT guide: [https://www.ifixit.com/Guide/iMac+Intel+27-Inch+EMC+2309+and+2374+Hard+Drive+Replacement/1634|iMac Intel 27" EMC 2309 and 2374 Hard Drive Replacement]. Jump down to Step10. The issue is replacing with the same manufactures drive or you'll need to swap out the sensor cable with the correct cable.

ステータス:

open

オリジナル投稿者: Dan ,

テキスト:

On the most part you should use the correct sized drive for your system. In this case a 3.5" for the primary HD. Yes, one can put a 2.5" drive in as a secondary drive but you really can't use it as the primary.

ステータス:

open