Skip to main content
ヘルプ

オリジナル投稿者: Seji the veggie ,

テキスト:

Reseating ZIF connectors can be difficult, because you're not sure if you have gotten the ZIF connector to seat properly. You may want to look on the LCD again to see if there are any dark splotches on the white backlight or if the LCD end of the cable is working. While the backlight itself may not be easy to damage, the circuit boards in many displays are very fragile. I broke one just by touching it! If that doesn't fix it and you're at the point of eternal desperation, then you may want to get a new LCD ([product|IF127-000]) and try that. If that doesn't fix the problem, you may also may want to inspect the logic board for any signs of corrosion. Hope this helps!

ステータス:

open