メインコンテンツにスキップ
ヘルプ

現在のバージョン作成者: Schwarzstein ,

テキスト:

Look in the guide, step # 9. There, on the second picture, you see that long, black part on top of the piston. This part can be turned: it mounts the strainer of the top-piston. when you turn it, the screw of the strainer should counterrotate. When the strainerscrew leaves that part, just pull out that black piece; there you will find a black O-ring. That O-ring often leaks after reparation because the strainer-screw is often mounted too tight.
 
For more information, google "Rändelspannmutter Saeco". Good
There is a new version and an older one, look carefully.
Good
luck !
For more information, google "Rändelspannmutter Saeco". Good
There is a new version and an older one, look carefully.
Good
luck !

ステータス:

open

編集者: Schwarzstein ,

テキスト:

Look in the guide, step # 9. There, on the second picture, you see that long, black part on top of the piston. This part can be turned: it mounts the strainer of the top-piston. when you turn it, the screw of the strainer should counterrotate. When the strainerscrew leaves that part, just pull out that black piece; there you will find a black O-ring. That O-ring often leaks after reparation because the strainer-screw is often mounted too tight.
 
For more information, google "RändelspannmutterRändelspannmutter Saeco". Good luck !
For more information, google "RändelspannmutterRändelspannmutter Saeco". Good luck !

ステータス:

open

オリジナル投稿者: Schwarzstein ,

テキスト:

Look in the guide, step # 9. There, on the second picture, you see that long, black part on top of the piston. This part can be turned: it mounts the strainer of the top-piston. when you turn it, the screw of the strainer should counterrotate. When the strainerscrew leaves that part, just pull out that black piece; there you will find a black O-ring. That O-ring often leaks after reparation because the strainer-screw is often mounted too tight.

For more information, google "Rändelspannmutter".  Good luck !

ステータス:

open