メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

ヘルプ

オリジナル投稿者: Owen ,

テキスト:

I had this problem.  The washer would stop at the rinse cycle and I found that the issue was that the extrusion that contacted the lid switch mechanically was broken at the tip.  Thus, the switch was not fully depressed.  I added material to the actuator and the washer resumed with the lid closed.  An easy way to test this is to try and depress the switch with a screwdriver or other long tool.  If it starts, then this is likely your problem.

ステータス:

open