メインコンテンツにスキップ
ヘルプ

現在のバージョン作成者: mayer (投票の詳細) ,

タイトル:

Digitizer not working, solder pad damaged

テキスト:

Hi guys,

I have a phone where the digitizer stopped working, I have tried replacing the screen and it didn't seem to help but by doing that I've noticed the digitizer connector doesn't look very good so I thought it might be the connector and attempted to change it.. unfortunately for me, after desoldering the connector, I've noticed that one of the soldering pads was missing.. now I'm not quite sure if this is repairable anymore, would I be able to somehow place a new pad in there?

I've tried to take a picture of the pads after desoldering..

[image|430711|align=center]

[image|431144|align=center]

Any suggestions?

Thanks!

LE: Managed to find out where this trace is coming from and also noticed there's still a bit of copper showing up as coming from the trace....

[image|432746|align=center]

Also having a hard time cleaning the flux from the board and I'm a bit afraid to use a toothbrush as it feels like things might just be ripped off from the board.

デバイス:

iPhone 5

ステータス:

open

承認済み回答:

201402

編集者: Alex ,

タイトル:

Digitizer not working, solder pad damaged

テキスト:

Hi guys,
 
I have a phone where the digitizer stopped working, I have tried replacing the screen and it didn't seem to help but by doing that I've noticed the digitizer connector doesn't look very good so I thought it might be the connector and attempted to change it.. unfortunately for me, after desoldering the connector, I've noticed that one of the soldering pads was missing.. now I'm not quite sure if this is repairable anymore, would I be able to somehow place a new pad in there?
 
I've tried to take a picture of the pads after desoldering..
 
[image|430711|align=center]
 
[image|431144|align=center]
 
Any suggestions?
 
Thanks!
 
LE: Managed to find out where this trace is coming from and also noticed there's still a bit of copper showing up as coming from the tracetrace....
LE: Managed to find out where this trace is coming from and also noticed there's still a bit of copper showing up as coming from the tracetrace....
 
[image|432746|align=center]
 
Also having a hard time cleaning the flux from the board and I'm a bit afraid to use a toothbrush as it feels like things might just be ripped off from the board.

デバイス:

iPhone 5

ステータス:

open

編集者: Alex ,

タイトル:

Digitizer not working, solder pad damaged

テキスト:

Hi guys,
 
I have a phone where the digitizer stopped working, I have tried replacing the screen and it didn't seem to help but by doing that I've noticed the digitizer connector doesn't look very good so I thought it might be the connector and attempted to change it.. unfortunately for me, after desoldering the connector, I've noticed that one of the soldering pads was missing.. now I'm not quite sure if this is repairable anymore, would I be able to somehow place a new pad in there?
 
I've tried to take a picture of the pads after desoldering..
 
[image|430711|align=center]
 
[image|431144|align=center]
 
Any suggestions?
 
Thanks!
 
LE: Managed to find out where this trace is coming from and also noticed there's still a bit of copper showing up as coming from the trace.
 
[image|432746|align=center]
 
Also having a hard time cleaning the flux from the board..board and I'm a bit afraid to use a toothbrush as it feels like things might just be ripped off from the board.
Also having a hard time cleaning the flux from the board..board and I'm a bit afraid to use a toothbrush as it feels like things might just be ripped off from the board.

デバイス:

iPhone 5

ステータス:

open

編集者: Alex ,

タイトル:

Digitizer not working, solder pad damaged

テキスト:

Hi guys,
 
I have a phone where the digitizer stopped working, I have tried replacing the screen and it didn't seem to help but by doing that I've noticed the digitizer connector doesn't look very good so I thought it might be the connector and attempted to change it.. unfortunately for me, after desoldering the connector, I've noticed that one of the soldering pads was missing.. now I'm not quite sure if this is repairable anymore, would I be able to somehow place a new pad in there?
 
I've tried to take a picture of the pads after desoldering..
 
[image|430711|align=center]
 
[image|431144|align=center]
 
Any suggestions?
 
Thanks!
 
LE: Managed to find out where this trace is coming from and also noticed there's still a bit of copper showing up as coming from the trace.
 
[image|432746|align=center]
 
Also having a hard time cleaning the flux from the board...

デバイス:

iPhone 5

ステータス:

open

編集者: Alex ,

タイトル:

Digitizer not working, solder pad damaged

テキスト:

Hi guys,
 
I have a phone where the digitizer stopped working, I have tried replacing the screen and it didn't seem to help but by doing that I've noticed the digitizer connector doesn't look very good so I thought it might be the connector and attempted to change it.. unfortunately for me, after desoldering the connector, I've noticed that one of the soldering pads was missing.. now I'm not quite sure if this is repairable anymore, would I be able to somehow place a new pad in there?
 
I've tried to take a picture of the pads after desoldering..
 
[image|430711|align=center]
 
[image|431144|align=center]
 
Any suggestions?
 
Thanks!
 
LE: Managed to find out where this trace is coming from and also noticed there's still a bit of copper showing up as coming from the trace.
 
[image|432746|align=center]

デバイス:

iPhone 5

ステータス:

open

編集者: Alex ,

タイトル:

Digitizer not working, solder pad damaged

テキスト:

Hi guys,
 
I have a phone where the digitizer stopped working, I have tried replacing the screen and it didn't seem to help but by doing that I've noticed the digitizer connector doesn't look very good so I thought it might be the connector and attempted to change it.. unfortunately for me, after desoldering the connector, I've noticed that one of the soldering pads was missing.. now I'm not quite sure if this is repairable anymore, would I be able to somehow place a new pad in there?
 
I've tried to take a picture of the pads after desoldering..
 
[image|430711|align=left][image|431144image|430711|align=center]
[image|431144|align=center
]
[image|430711|align=left][image|431144image|430711|align=center]
[image|431144|align=center
]
 
Any suggestions?
 
Thanks!
 
LE: Managed to find out where this trace is coming from and also noticed there's still a bit of copper showing up as coming from the trace.
 
[image|432746|align=center]

デバイス:

iPhone 5

ステータス:

open

編集者: Alex ,

タイトル:

Digitizer not working, solder pad damaged

テキスト:

Hi guys,
 
I have a phone where the digitizer stopped working, I have tried replacing the screen and it didn't seem to help but by doing that I've noticed the digitizer connector doesn't look very good so I thought it might be the connector and attempted to change it.. unfortunately for me, after desoldering the connector, I've noticed that one of the soldering pads was missing.. now I'm not quite sure if this is repairable anymore, would I be able to somehow place a new pad in there?
 
I've tried to take a picture of the pads after desoldering..
 
[image|430711|align=leftimage|430711|align=left][image|431144]
[image|430711|align=leftimage|430711|align=left][image|431144]
 
Any suggestions?
 
Thanks!

デバイス:

iPhone 5

ステータス:

open

オリジナル投稿者: Alex ,

タイトル:

Digitizer not working, solder pad damaged

テキスト:

Hi guys,

I have a phone where the digitizer stopped working, I have tried replacing the screen and it didn't seem to help but by doing that I've noticed the digitizer connector doesn't look very good so I thought it might be the connector and attempted to change it.. unfortunately for me, after desoldering the connector, I've noticed that one of the soldering pads was missing.. now I'm not quite sure if this is repairable anymore, would I be able to somehow place a new pad in there?

I've tried to take a picture of the pads after desoldering..

[image|430711|align=left]

Any suggestions?

Thanks!

デバイス:

iPhone 5

ステータス:

open