メインコンテンツにスキップ
ヘルプ

現在のバージョン作成者: oldturkey03 ,

テキスト:

The F11 code is caused by either a CCU failure or an MCU failure...here's how to tell:
 
If your machine starts a cycle and the water fills but the drum NEVER turns, your MCU is bad...it's most cost effective to buy a refurbished one and you can get them on eBay for $99 all day long.
 
If your machine makes it most of the way through a cycle but throws an F11 code during the rinse or spin, your CCU has the relay solder / vibration problem...and I can fix that for $65.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=181300988546
problem...
If your machine makes it most of the way through a cycle but throws an F11 code during the rinse or spin, your CCU has the relay solder / vibration problem...and I can fix that for $65.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=181300988546
problem...

ステータス:

open

オリジナル投稿者: jhagner ,

テキスト:

The F11 code is caused by either a CCU failure or an MCU failure...here's how to tell:

If your machine starts a cycle and the water fills but the drum NEVER turns, your MCU is bad...it's most cost effective to buy a refurbished one and you can get them on eBay for $99 all day long.

If your machine makes it most of the way through a cycle but throws an F11 code during the rinse or spin, your CCU has the relay solder / vibration problem...and I can fix that for $65.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=181300988546

ステータス:

open