Skip to main content
ヘルプ

現在のバージョン作成者: Matt ,

テキスト:

Gary was right on, unplug the battery for a minute then try a RESTORE directly through iTunes and make sure to update to the latest iOS (don't forget to back upup and make sure you are aware of the iCLOUD ACCOUNT AND PASSWORD attached the phone before doing this). I've seen this issue a lot. Most of the time it's from liquid damage or logic board damage and not from a faulty camera, but your camera could also be defective. Once upon a time I did notice something really weird and probably isn't a good idea to consider it a solution butguess the metal plate that covers the ribbons on the top left of the logic boardLED could have some affect (This plate covers the Camera Ribbon, LCD ribbon, Digitizer Ribbon, ect..) On this one particular iPhonebe shorting out if I loosened one of these 4 or 5 screws just a little bit the flash light would turn off and when I tightened it back upwas touching the flash light would turn onlogic board.
Gary was right on, unplug the battery for a minute then try a RESTORE directly through iTunes and make sure to update to the latest iOS (don't forget to back upup and make sure you are aware of the iCLOUD ACCOUNT AND PASSWORD attached the phone before doing this). I've seen this issue a lot. Most of the time it's from liquid damage or logic board damage and not from a faulty camera, but your camera could also be defective. Once upon a time I did notice something really weird and probably isn't a good idea to consider it a solution butguess the metal plate that covers the ribbons on the top left of the logic boardLED could have some affect (This plate covers the Camera Ribbon, LCD ribbon, Digitizer Ribbon, ect..) On this one particular iPhonebe shorting out if I loosened one of these 4 or 5 screws just a little bit the flash light would turn off and when I tightened it back upwas touching the flash light would turn onlogic board.
 
If the screen replacement was done recently I would bring it back and ask them to simply disassemble and reassembly it because it could just be a simple ground issue. More than likely it wasn'ttest another camera in the faultphone just to rule out of the technician but I don't knowpossibility of a faulty camera.
If the screen replacement was done recently I would bring it back and ask them to simply disassemble and reassembly it because it could just be a simple ground issue. More than likely it wasn'ttest another camera in the faultphone just to rule out of the technician but I don't knowpossibility of a faulty camera.

ステータス:

open

編集者: Matt ,

テキスト:

Gary was right on, unplug the battery for a minute then try a hard resetRESTORE directly through iTunes and make sure to update to the latest iOS (don't forget to back up). I've seen this issue a lot. Most of the time it's from liquid damage or logic board damage and not from a faulty camera, but your camera could also be defective. Once upon a time I did notice something really weird and probably isn't a good idea to consider it a solution but the metal plate that covers the ribbons on the top left of the logic board could have some affect (This plate covers the Camera Ribbon, LCD ribbon, Digitizer Ribbon, ect..) On this one particular iPhone if I loosened one of these 4 or 5 screws just a little bit the flash light would turn off and when I tightened it back up the flash light would turn on.
Gary was right on, unplug the battery for a minute then try a hard resetRESTORE directly through iTunes and make sure to update to the latest iOS (don't forget to back up). I've seen this issue a lot. Most of the time it's from liquid damage or logic board damage and not from a faulty camera, but your camera could also be defective. Once upon a time I did notice something really weird and probably isn't a good idea to consider it a solution but the metal plate that covers the ribbons on the top left of the logic board could have some affect (This plate covers the Camera Ribbon, LCD ribbon, Digitizer Ribbon, ect..) On this one particular iPhone if I loosened one of these 4 or 5 screws just a little bit the flash light would turn off and when I tightened it back up the flash light would turn on.
 
If the screen replacement was done recently I would bring it back and ask them to simply disassemble and reassembly it because it could just be a simple ground issue. More than likely it wasn't the fault of the technician but I don't know.
If the screen replacement was done recently I would bring it back and ask them to simply disassemble and reassembly it because it could just be a simple ground issue. More than likely it wasn't the fault of the technician but I don't know.

ステータス:

open

編集者: Matt ,

テキスト:

Gary was right on, unplug the battery for a minute then try a hard reset (don't forget to back up). I've seen this issue a lot. Most of the time it's from liquid damage or logic board damage and not from a faulty camera, but your camera could also be defective. Once upon a time I did notice something really weird and probably isn't a good idea to consider it a solution but the metal plate that covers the ribbons on the top left of the logic board could have some affect (This plate covers the Camera Ribbon, LCD ribbon, Digitizer Ribbon, ect..) On this one particular iPhone if I loosened one of these 4 or 5 screws just a little bit the flash light would turn off and when I tightened it back up the flash light would turn on.
 
If the screen replacement was done recently I would bring it back and ask them to simply disassemble and reassembly it because it could just be a simple ground issue.

ステータス:

open

編集者: Matt ,

テキスト:

Gary was right on, unplug the battery for a minute then try a hard reset (don't forget to back up). I've seen this issue a lot. Most of the time it's from liquid damage or logic board damage and not from a faulty camera, but your camera could also be defective. Once upon a time I did notice something really weird and probably isn't a good idea to consider it a solution but the metal plate that covers the ribbons on the top left of the logic board could have some affect (This plate covers the Camera Ribbon, LCD ribbon, Digitizer Ribbon, ect..) On this one particular iPhone if I loosened one of these 4 or 5 screws just a little bit the flash light would turn off and when I tightened it back up the flash light would turn on.
Gary was right on, unplug the battery for a minute then try a hard reset (don't forget to back up). I've seen this issue a lot. Most of the time it's from liquid damage or logic board damage and not from a faulty camera, but your camera could also be defective. Once upon a time I did notice something really weird and probably isn't a good idea to consider it a solution but the metal plate that covers the ribbons on the top left of the logic board could have some affect (This plate covers the Camera Ribbon, LCD ribbon, Digitizer Ribbon, ect..) On this one particular iPhone if I loosened one of these 4 or 5 screws just a little bit the flash light would turn off and when I tightened it back up the flash light would turn on.

ステータス:

open

オリジナル投稿者: Matt ,

テキスト:

Gary was right on, unplug the battery for a minute then try a hard reset (don't forget to back up). I've seen this issue a lot. Most of the time it's from liquid damage or logic board damage and not from a faulty camera, but your camera could also be defective. Once upon a time I did notice something really weird and probably isn't a good idea to consider it a solution but the metal plate that covers the ribbons on the left of the logic board could have some affect (This plate covers the Camera Ribbon, LCD ribbon, Digitizer Ribbon, ect..) On this one particular iPhone if I loosened one of these 4 or 5 screws just a little bit the flash light would turn off and when I tightened it back up the flash light would turn on.

ステータス:

open