Skip to main content
ヘルプ

現在のバージョン作成者: oldturkey03 ,

テキスト:

Zaef89zaef89, just to be a tie breaker here. Thathere :-)That part is reference designator SP1_RF which is the spring _Upper_ antenna-N90. It is unrelated to your digitizer. Check your 343S0499 touch controller and see if a reflow could fix this. Of course you will have to check your logic board for any other missing, broken, or burned components. Hope this helps, good luck.
Zaef89zaef89, just to be a tie breaker here. Thathere :-)That part is reference designator SP1_RF which is the spring _Upper_ antenna-N90. It is unrelated to your digitizer. Check your 343S0499 touch controller and see if a reflow could fix this. Of course you will have to check your logic board for any other missing, broken, or burned components. Hope this helps, good luck.
 
[image|337433|align=left]
 
[image|337434|align=left]

ステータス:

open

オリジナル投稿者: oldturkey03 ,

テキスト:

Zaef89, just to be a tie breaker here. That part is reference designator SP1_RF which is the spring _Upper_ antenna-N90. It is unrelated to your digitizer. Check your 343S0499 touch controller and see if a reflow could fix this. Of course you will have to check your logic board for any other missing, broken, or burned components. Hope this helps, good luck.

[image|337433|align=left]

[image|337434|align=left]

ステータス:

open