メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

ヘルプ

現在のバージョン作成者: oldturkey03 ,

テキスト:

Paul, you would have to drop the tie-rod end, then split the tie-rod end from the rack end. Sounds easy enough but a PITA unless you have the right tools and you '''will have to align''' the steering after. [http://www.youtube.com/watch?v=rrtQwjjLQFA|Here is] an interesting idea, not sure if it would work for you. Here is the official version :"
 
1. REMOVE FRONT WHEELS
 
2. REMOVE ENGINE UNDER COVER LH
 
3. REMOVE ENGINE UNDER COVER RH
4. DISCONNECT TIE ROD END SUB–ASSY
(a) Remove the cotter pin and nut.
(b) Using SST, disconnect tie rod end sub–assy from the steering knuckle.
Toyota tool SST 09628–62011
 
[image|211131]4. DISCONNECT TIE ROD END SUB–ASSY
[image|211131]4. DISCONNECT TIE ROD END SUB–ASSY
 
5. REMOVE TIE ROD END SUB–ASSY
(a) Place matchmarks on
(a) Remove the tie rod end with rack end.
(b) Loosen the lock nut, and remove the tie rod end
cotter pin and lock nut.
5. REMOVE TIE ROD END SUB–ASSY
(a) Place matchmarks on
(a) Remove the tie rod end with rack end.
(b) Loosen the lock nut, and remove the tie rod end
cotter pin and lock nut.
 
[image|211129(b) Using SST, disconnect tie rod end sub–assy from the steering knuckle.

Toyota tool SST 09628–62011

[image|211131|align=center]

5. REMOVE TIE ROD END SUB–ASSY

(a) Place matchmarks on the tie rod end with rack end.

(b) Loosen the lock nut, and remove the tie rod end and lock nut.

[image|211129|align=center
]
[image|211129(b) Using SST, disconnect tie rod end sub–assy from the steering knuckle.

Toyota tool SST 09628–62011

[image|211131|align=center]

5. REMOVE TIE ROD END SUB–ASSY

(a) Place matchmarks on the tie rod end with rack end.

(b) Loosen the lock nut, and remove the tie rod end and lock nut.

[image|211129|align=center
]
 
6. REMOVE STEERING RACK BOOT NO.1
(a) Remove the steering rack boot clip.
(b) Using a screwdriver, remove the clamp and steering rack boot"
 
[image|211130(a) Remove the steering rack boot clip.

(b) Using a screwdriver, remove the clamp and steering rack boot"

[image|211130|align=center
]
[image|211130(a) Remove the steering rack boot clip.

(b) Using a screwdriver, remove the clamp and steering rack boot"

[image|211130|align=center
]
 
Hope this helps, good luck.

ステータス:

open

編集者: oldturkey03 ,

テキスト:

Paul, you would have to drop the tie-rod end, then split the tie-rod end from the rack end. Sounds easy enough but a PITA unless you have the right tools and you '''will have to align''' the steering after. [http://www.youtube.com/watch?v=rrtQwjjLQFA|Here is] an interesting idea, not sure if it would work for you. HopeHere is the official version :"
1. REMOVE FRONT WHEELS
2. REMOVE ENGINE UNDER COVER LH
3. REMOVE ENGINE UNDER COVER RH
4. DISCONNECT TIE ROD END SUB–ASSY
(a) Remove the cotter pin and nut.
(b) Using SST, disconnect tie rod end sub–assy from the steering knuckle.
Toyota tool SST 09628–62011

[image|211131]

5. REMOVE TIE ROD END SUB–ASSY
(a) Place matchmarks on the tie rod end with rack end.
(b) Loosen the lock nut, and remove the tie rod end and lock nut.

[image|211129]

6. REMOVE STEERING RACK BOOT NO.1
(a) Remove the steering rack boot clip.
(b) Using a screwdriver, remove the clamp and steering rack boot"

[image|211130]

Hope
this helps, good luck.
Paul, you would have to drop the tie-rod end, then split the tie-rod end from the rack end. Sounds easy enough but a PITA unless you have the right tools and you '''will have to align''' the steering after. [http://www.youtube.com/watch?v=rrtQwjjLQFA|Here is] an interesting idea, not sure if it would work for you. HopeHere is the official version :"
1. REMOVE FRONT WHEELS
2. REMOVE ENGINE UNDER COVER LH
3. REMOVE ENGINE UNDER COVER RH
4. DISCONNECT TIE ROD END SUB–ASSY
(a) Remove the cotter pin and nut.
(b) Using SST, disconnect tie rod end sub–assy from the steering knuckle.
Toyota tool SST 09628–62011

[image|211131]

5. REMOVE TIE ROD END SUB–ASSY
(a) Place matchmarks on the tie rod end with rack end.
(b) Loosen the lock nut, and remove the tie rod end and lock nut.

[image|211129]

6. REMOVE STEERING RACK BOOT NO.1
(a) Remove the steering rack boot clip.
(b) Using a screwdriver, remove the clamp and steering rack boot"

[image|211130]

Hope
this helps, good luck.

ステータス:

open

オリジナル投稿者: oldturkey03 ,

テキスト:

Paul, you would have to drop the tie-rod end, then split the tie-rod end from the rack end. Sounds easy enough but a PITA unless you have the right tools and you '''will have to align''' the steering after. [http://www.youtube.com/watch?v=rrtQwjjLQFA|Here is] an interesting idea, not sure if it would work for you. Hope this helps, good luck.

ステータス:

open