when I go to "Touch ID & Passcode" it's looks like I have never set a touch ID before, when I try to make a new fingerprint it says " Failed, unable to complete Touch ID setup. Please go back and try again."

everything with the home button works.

I updated iOS and try to reboot iPhone

also I go back several times to check on the home button cable all is good.

⟐ Answered 11月 23, 2020 at 21:14 GMT-7

I just installed iOS 11.3 and this new "Battery Health" feature only seems to work with a original battery from Apple?!

It makes all the battery problems clear for me!

⟐ Commented 9月 23, 2021 at 8:08 GMT-7

⟐ Answered 7月 17, 2018 at 0:46 GMT-7

I just replaced the screen on my wife's phone after it was cracked. Everything's working OK now except for the Home button. It's totally unresponsive right now.

I disconnected and reconnected all the cables on the front plate and I'm still getting the problem. Enabling Assistive touch as a workaround works, but I'd like to have a functioning Touch ID and Home button.

I'm wondering what I could have done wrong that could be fixed I've seen plenty of issues that refer to Touch ID not working after this operation, but nothing that covers the whole Home button being dead. Any ideas?

⟐ Commented 12月 28, 2019 at 4:12 GMT-7

I live in Ukraine. My friend from California bought iphone 6 and brought it to me, so have no possibility to return it back to Apple, we haven't got autorized apple distributors.

After unboxing I recovered it with my iphone 5s backup . And tried to make a call, all I heard was Nothing. Another person always hear me well but I don't hear anything even if I switch to the speaker and headphones as well.

I tried to use skype. it works I do hear everything. So made a conclusion that my earpiece works as well as speakerphone, because it works in youtube app and etc.

What I've already tried:

- Restore it from iTunes (3 times)

- Tried another sim card of another carrier.

- My sim card works in iphone 5s, checked all the problems might be related to carrier.

- Chatted with Apple support (2 consultants, 1 supervisor, all options exhausted)

I found smth related to my question here I can't hear my phone calls unless I put it on speaker., but in my situation speakerphone doesn't work also while calling and I'm sure my earpiece is not broken, it's some kinda software bug, that makes my phone a brick

Maybe smb have faced with such issue and can suggest something valuable,

thank you

p.s. sorry for my English

⟐ Commented 2月 11, 2021 at 15:17 GMT-7

⟐ Answer deleted 3月 23, 2021 at 1:29 GMT-7

⟐ Commented 2月 12, 2026 at 12:09 GMT-7

⟐ Commented 6月 04, 2023 at 5:14 GMT-7

Changing the screen on a customers Iphone 6 and I can't seem to get the proximity sensor working. I've taken it apart 8-10x now, ensure that the plastic "holders" for everything is positioned correctly and that the proximity sensor is dust free. It just doesn't work..

Front camera works, the light sensor works. (Auto adjusting brightness) everything except turning the screen off during calls...

Any tips? :)

P.S: All componets appear to be fully functional and I have no other screens / parts to test with currently.

⟐ Answered 11月 21, 2025 at 7:03 GMT-7

Will simply replacing the antenna or the antenna cables fix it or is this a common issue where the chip on the mother board is bad?

If it's the antenna cable or module, which one is better to try first? I don't want to buy the wrong one.

Is it more likely this: iPhone 6 Top Left Antenna

or this: iPhone 6 Logic Board Antenna Flex Cable

Thanks!

⟐ Answered 4月 18, 2019 at 22:43 GMT-7

I have recently purchased an iPhone 6, 128gb space grey with a cracked screen. I need to remove the pentalobe screws to replace the screen and get the phone up and running.

Unfortunately the previous owner has completely stripped one of the pentalobe screws and I can not remove it with the correct tools. The screw has no shape left whatsoever (see photo) and will not grip at all.

I have tried different shaped screw drivers, the rubber band method and a stanley knife. I have heard to try super glue but I am scared it will seep into the thread and make it harder to remove. What is the best method to remove the screw?

⟐ Answer deleted 3月 07, 2018 at 17:36 GMT-7

⟐ Commented 9月 08, 2019 at 1:01 GMT-7

These are pictures of how my phone looks too

⟐ Commented 12月 31, 2025 at 20:17 GMT-7

⟐ Commented 2月 18, 2025 at 10:46 GMT-7

Can you deliver kit in INDIA and how many shipping charges and day will receive kit

⟐ Answer accepted 1月 10, 2018 at 21:51 GMT-7

⟐ Commented 4月 11, 2020 at 14:28 GMT-7

⟐ Commented 11月 10, 2023 at 1:14 GMT-7

⟐ Answered 8月 24, 2020 at 16:59 GMT-7

Is anyone else suffering issues with the new iPhone 6 screens. I have had a couple now where the glue appears to be failing and the glass and LCD are coming away from the frame.

Both times it appears to be near the mute button, which causing the glass to bounch slightly and light leak between the frame and rear of the LCD.

Any tips on repairing them?

⟐ Commented 9月 28, 2022 at 13:41 GMT-7

It's stuck on 1%and doesn't go any higher.

When I unplug the charger it turns off even if it's been left all night.

It keeps switching on and off.

As long as it's in the charger it works fine.

It doesn't switch on if I plug it in to my computer it keeps showing the apple logo then a black screen on and on.

I at least wanted to back it up in case of a reset.

Sometimes when it switches on it gives 100% but then shuts down quickly even if plugged in.

I get the sign that it's charging but it doesn't increase.

⟐ Commented 9月 09, 2022 at 6:42 GMT-7