⟐ Commented 11月 01, 2018 at 12:32 GMT-7

⟐ Commented 9月 02, 2016 at 5:14 GMT-7

The issue started happening about two days after a water incident. I was at work in the basement with the phone in my jean pocket and had to run through a little water that was spraying over the walkway from a broken pipe. I only got a little wet, but now after researching the error and seeing how it could be related to water damage, I'm thinking some water may have got inside the connector because it had a greenish look to it.

After cleaning the connector out and wiping the green away, many resets, and restoring the phone, I still have the same issue. From comments around the web, I've read that simply cleaning the connector got rid of the error for a lot of people.

What further steps I should take? If I was to open the phone, where could the source of the issue be, other than the connector itself?

⟐ Answer edited 6月 01, 2016 at 14:29 GMT-7

⟐ Answer accepted 4月 10, 2018 at 19:12 GMT-7

⟐ Commented 9月 02, 2018 at 1:21 GMT-7

http://ntsstudios.com/previews/IMG_0480....

http://ntsstudios.com/previews/IMG_0481....

⟐ Answered 7月 28, 2014 at 18:15 GMT-7

⟐ Commented 1月 16, 2023 at 23:14 GMT-7

I have recieved and old water damaged iphone from a friend that she now has no use for. I and trying to fix it in my spare time.

The phone was lost outside in her yard for the whole winter and recovered the next year. I have taken the motherboard and cleaned it with isopropyl alchocol. The phone works almost perfectly besides the baseband issues.

I originally got the phone restored, and it was on the phone activation screen. I could not activate due to carrier lock. I then got her to come over to try her SIM card and this is when it still didnt work. I assumed there was something wrong and tried restoring it. I got it restored and the phone now said connect to itunes. Itunes continuily could not activate the phone and kept giving me the error message '' cannot continue with activation at this time....."

I then went for another restore, only to get error -1. I read about this error and tried all solutions. The furthest I have gotten was I hacktivated the phone and got it turned on completely. This gave me the ability to check eveythings working behaviour. EVERYTHING still works besides the always searching for service and there is no baseband information in settings.

I believe this is a baseband chip failure. I would like to know all possible solutions that could work. I am willing to solder and rip apart the motherboard because this is just a phone for my spare time.

Thanks,

Josh

⟐ Commented 12月 15, 2018 at 22:02 GMT-7

⟐ Answered 3月 24, 2014 at 20:29 GMT-7

⟐ Answered 8月 27, 2023 at 21:13 GMT-7

the sound from loudspeaker lil bit unclear, and when i make a call, my partner can't hear my voice clearly n so weak sound.

any want can help please,.what should i do ?

⟐ Answered 4月 10, 2021 at 22:49 GMT-7

This mic is not working. What can I do to fix this?

The mic works perfectly during calls (no speaker), while recording audio on whatsapp, and recording voice memos. So I know the problem is the upper microphone and not the lower microphone.

How do I fix it?

Thank you.

⟐ Commented 7月 14, 2016 at 20:29 GMT-7

I fully restored the iphone, and tested it without installing any app, and the problem remains. I have read that many people have issues with the proximity sensor, but this doesn't seem to be the case, the sensor actually works fine with the phone app, and this never had happened before.

Do I need to change the LCD or any other part? Any suggestions?

⟐ Answered 7月 01, 2016 at 14:43 GMT-7

where can i buy a 16gb iPhone 4 logicboard without simlock??

On ebay there is just one seller, who sell it for 445€, he is crazy?

⟐ Commented 10月 02, 2015 at 1:28 GMT-7

I have looked at forums online to try and find a fix but everyone else says that when they apply pressure to the phone it makes the sound. My phone CONTINUES clicking at a regular interval.

Also, my battery has been draining at almost 10 times the speed! I have to charge it 2-3 times a day.

What I need to know is what part I need to replace or how to maintenance it?

or if anyone knows how to troubleshoot this issue

⟐ Commented 10月 29, 2023 at 15:03 GMT-7

oh i forgot to tell you something.

once, my phone goes off cause the battery is 0%, n then it shows like this n it charged normaly until like a minute after my phone turned back on. when it turned on, its not charged anymore, like i said no thunder bolt but it actualy slow chraged. like realy slooow. spent a whole day for fullfilled it

⟐ Commented 12月 29, 2016 at 7:45 GMT-7

what should i do?

⟐ Commented 7月 22, 2015 at 14:14 GMT-7

⟐ Commented 2月 03, 2015 at 15:25 GMT-7

I just got the new dock connector into the phone and fired everything up. When I plug the charging cable from either a computer or wall outlet, all I get is the icon telling me it is pulling power from the cable. It won't charge the battery.

I've done some troubleshooting already. I restarted the phone. I opened everything up, disconnected the battery and dock connector cables inside of the phone, recleaned the connection points using a q-tip with Windex, connected everything again, and closed up the phone. Still the same problem.

I'm really at a loss here. The phone wasn't submerged in liquid, so I do not see how there could be a short somewhere else such as with the battery or logic board. Any guidance on where to go from here would be appreciated.

⟐ Answered 11月 19, 2014 at 14:18 GMT-7

256 or 512

⟐ Answered 6月 22, 2013 at 0:11 GMT-7