Thank you.

Here is a picture of the spot:

⟐ Commented 10月 20, 2016 at 3:30 GMT-7

It doesn't happen straight away but over a few hours with no usage of unit.

It seems to be in the middle of the display, and nowhere near the edges.

I've changed the digitizer twice, thinking it was that, but it's still happening.

Installation had zero issues, and I've taken it out twice, but it's still happening.

Please help.

⟐ Commented 4月 29, 2016 at 2:45 GMT-7

On the four iPads that are recognizing the computers as speakers, it looks like this:

They all have iOS 9.0.2. and the D-Link and the iPads are on the same WiFi. I've also tried reinstalling iTunes and Reflector and restoring the iPads. The problem seems to originate from the iPads themselves, not the PC's or their iTunes programs. All the settings look the same but I did notice a difference in the availability of home sharing in the general settings on the iPad.

On the malfunctioning iPads the menu's look like this:

Even when turned on off it still doesn't work:

On the iPads that display Airplay the way I want it the home sharing option is not available:

I've been troubleshooting this for over two weeks now and I would greatly appreciate any help.

⟐ Commented 3月 14, 2016 at 8:39 GMT-7

⟐ Commented 1月 14, 2016 at 15:54 GMT-7

I checked the digitizer connector and it seems fine. What am I doing wrong?

As you see when I press the touch screen the area is marked with at box. I was now able to get past the first screen but when I press the keyboard on the screen the keys are marked with a border around the key but nothing shows in the password field.

**UPDATE**

I tried to put back the original digitizer to test it even if it is broken. No better luck. But now the iPad boots to the Apple logo and then goes black. I have to unplug the battery and start up again and the same thing happens, Apple logo - then black! What the heck is happening?

**UPDATE**

Like I wrote in my comment down under everything is working now!

⟐ Commented 12月 16, 2015 at 0:24 GMT-7

Touch is working fine but display has gone all crazy.

⟐ Commented 12月 14, 2015 at 20:49 GMT-7

I have been working on an iPad Mini which is giving me headache. I replaced the digitiser and experienced the screen going absolutely crazy when laid flat on the frame.

Got the solution for that by searching here - taping the copper parts on the new digitiser which solved the issue. But then I got a dead spot on the upper left corner instead, approx. 2x2 cm where the digitiser is unresponsive. Tried another digitiser but with the same result - a dead spot the same place.

When removing the digitiser from the frame and holding it up, it seems to work periodically.

I tend to think that there is a hardware error in the iPad but maybe I'm just missing something vital? Any suggestions/advice will be greatly appreciated ..

⟐ Answered 11月 27, 2015 at 7:50 GMT-7

I have read a lot of stuff here regarding the tape on the digitizer contact, I tried it with no success.

I have also available pictures of the digitizer and lcd connectors on the motherboard

Please help, I don't want to pay $400 for a new iPad!

⟐ Commented 11月 24, 2015 at 19:26 GMT-7

By changing the digitizer i cut through the old digitizer cable, not thinking about that there was still the battery connected - could that have caused the problem. If yes, how can i fix it?

⟐ Answered 11月 09, 2015 at 18:55 GMT-7

Here is an image of the display problem. Since it doesn't show up in the screen shots does that indicate a problem with LCD?

⟐ Commented 9月 22, 2015 at 16:03 GMT-7

I replaced the front glass panel on the iPad mini. After I tried to turn it on I saw streaks on the display and the apple logo was blurred. I reopened all and checked all cable connections. All were connected properly.

Also if I try to slide the screen keeps black only the first lines at the top are moving.

Do you have any ideas what I can do?

⟐ Answered 9月 02, 2015 at 6:28 GMT-7

I have the same issue , i have lost the parts near the battery connector, See Link.

I will be more than happy to know what is part marked as "2"

Can i create a short cut on either one of 1 or 2 instead of replace those ?

Thank you

Uzi

⟐ Answered 8月 14, 2015 at 23:25 GMT-7

⟐ Commented 7月 03, 2015 at 11:17 GMT-7

see pictures...tq

⟐ Answered 4月 09, 2015 at 22:10 GMT-7

⟐ Answered 5月 03, 2014 at 0:33 GMT-7

⟐ Commented 3月 28, 2014 at 6:03 GMT-7

What is the glue that is used in the unit,I have the double sided tape but the home button does not stay in place with it.

Thanks

Tom

⟐ Answered 10月 15, 2013 at 19:41 GMT-7

⟐ Answered 2月 10, 2025 at 7:40 GMT-7

After display assembly replacement for the iPad Mini 4 the new display will not lay flat on the housing. it pops up at the lower right hand side as if something is pushing it up and the adhesive will not hold it. At first I thought this was the fault of a bent frame, but after much shaping and reshaping, I’ve ruled that out. the frame is immaculate. I then went through and checked the routing on all flex and antenna cables, which is also perfect. What is causing this? I can do an iPad digi repair in my sleep but this one has me stumped. Any input would be a help. Never had this issue with Mini 4 repairs before, but now seeing it on the second device in as many weeks.

⟐ Commented 7月 17, 2024 at 12:39 GMT-7

⟐ Answered 6月 20, 2024 at 11:13 GMT-7