⟐ Answered 6月 03, 2025 at 7:36 GMT-7

タイトルにも書いてある通り、私のPSPはD-Pad付近の二つのネジが不十分にしか回らなくなってしまいました。

D-Pad側のネジは殆ど回っている感覚が無く、一応完全に接着していないわけでは無いのでしょうがそれでも力を入れるとすぐに抜けてしまい、アナログスティック側のねじは締まりはするのですが締めても締めても固定されません。結果、PSPのフロントパネルは大きく浮き上がっています。

不可解な事に、フロントパネルだけを取り外してそこの穴にネジを差し込むと両方とも正常に機能し、しっかりと周り、固定される手応えを感じることが出来ました。

これは何故なのでしょうか？

Hi these are the photos .First time i open a psp device,

Here are the pictures

And the motherboard

⟐ Commented 4月 11, 2026 at 23:57 GMT-7

⟐ Answered 4月 04, 2026 at 15:29 GMT-7

⟐ Answered 4月 03, 2026 at 7:55 GMT-7

All of this started when my psp ran out of battery for a long time and turned it on again, the time setting prompt appeared and accidentally let the battery run out of power, since then it doesn't accept any kind of charging.

⟐ Commented 4月 02, 2026 at 19:23 GMT-7

⟐ Answered 4月 01, 2026 at 3:53 GMT-7

⟐ Commented 3月 28, 2026 at 15:19 GMT-7

I followed several tutorials and my screen is actually working, but I get this weird display with a pixelized view and an oversized display scale (see the truncated upper status bar):

I read several times that a tiny bridge had to be made by soldering pads or one of the orange spots, but I don't know if this is related to my issue. My backlight fuse seems to be ok.

This is what my PCB looks like:

⟐ Commented 3月 24, 2026 at 7:33 GMT-7

⟐ Answered 3月 16, 2026 at 7:35 GMT-7

Worked on PS Vita 1000 3G and lost SMD capacitor by Hot Air gun.

I wanted to ask if anyone knows the rating of the lost capacitor near to the

proprietary charging port. I wanted to put type-c, but without a capacitor I can't install mod

⟐ Answered 3月 01, 2026 at 8:23 GMT-7

⟐ Answered 2月 25, 2026 at 23:27 GMT-7

Are you going to sell the Playstation portal battery?

Thank you and have a great day!

Sincerely,

Corey

⟐ Answered 2月 21, 2026 at 21:49 GMT-7

⟐ Answer accepted 2月 13, 2026 at 16:42 GMT-7

⟐ Answered 2月 13, 2026 at 1:32 GMT-7

first currently my biggest issue. The power button on my device seems to work. While charging, before the battery has enough power to turn on when I press the button, the light flashes orange, which is my indicator that the button isn't broken. This is consistent with both the original one and the replacement purchased.

The device may power on if I hold the button down; no matter what I do, the button will not power off the device.

The Home button on the device seems to be completly non functional other than in rare moments. Hoping the replacement board for the left side fixes that.

The entire right controller board has just stopped working. may have been the ribbon cable.

⟐ Commented 2月 10, 2026 at 10:25 GMT-7

Since putting it back together the menu's work ok with the directional pad but when I load a game the character just runs to the right all the time in Dexter. Tried with another game that boots to the menu and it keeps scrolling downwards in the menus (could be due to it going right?)

I've tried removing the analog stick, but the character still goes right in game. Also tried cleaning the connections on the d pad and the analog connection and still is the same.

Also I have to press down hard of the dpad for it to work (just the down arrow). Everything else seams to work ok on the psp 1000.

Any advice would be greatly appreciated.

⟐ Commented 2月 09, 2026 at 23:16 GMT-7

I opened the device and saw most ribbon cables detached and I plugged them , but it doesn’t light orange or get power at all , is there something wrong in the picture that I didn’t notice ? (I tested the DC-In Power Jack in another device and it powered on so I guess it isn’t the problem)

⟐ Commented 1月 30, 2026 at 8:13 GMT-7

also, i forgot to mention, when i tried powering it on with no battery i used the oem charger

⟐ Commented 1月 29, 2026 at 1:20 GMT-7

Also, somebody has been inside before. Is it surely a PSP 3000 board?

Any advice?

⟐ Commented 1月 28, 2026 at 10:48 GMT-7