⟐ Answer accepted 5月 10, 2026 at 20:33 GMT-7

⟐ Answer accepted 5月 10, 2026 at 20:33 GMT-7

修理(バネ棒外し)して頂けませんでしょうか。

⟐ Answer accepted 5月 10, 2026 at 20:33 GMT-7

メーカーに修理はしてませんと断れました。

⟐ Answer accepted 5月 08, 2026 at 14:59 GMT-7

ケースと液晶パネルとの隙間が無くカッターナイフ等の刃が入りません。

本体は壊れても構いません、液晶が壊れない方法、液晶を別のWatchに使用いたいので、どなたかよい方法が有ったら教えて下さい、お願いします。

How to remove the LCD panel from the ceramiccase of the AppleWatch SE1

There is no gap between the case and the LCD panel, so a blade such as a utility knife cannot fit in.

I don't mind if the main body breaks, but I would like to know if there is a way to avoid breaking the LCD, and I would like to use the LCD on another Watch, so if anyone has a good method please let me know. Thank you.

⟐ Commented 6月 25, 2025 at 19:04 GMT-7

画面をふさぐ前に起動確認したところ、画面が映らなくなってしまいました。iPhoneでBluetooth接続はされてるのが確認出来ます。

買った画面が不良なのか？配線等を気付かないうちに損傷しているのか？

電源が入ってそうな状態でサイドボタン長押しするとバイブレーションも反応してます。

どこがダメなのか？分からないのですが、経験豊富な方で思い当たる事などあれば教えて頂けると幸いです。

⟐ Commented 11月 15, 2024 at 23:17 GMT-7

＊これは下のアンサーフォーラムのページを日本語訳したものです。

Why is screen not working

⟐ Answered 9月 30, 2024 at 17:47 GMT-7

I bought Apple Watch (45 mm) Series 7 screen adhesive. After an extremely thorough cleaning of the metal frame and the screen borders where the factory glue was applied, the adhesive appeared to fit perfectly. I clamped the screen and frame with four clamps for 48 hours, and it seemed fully bonded. However, after about two weeks, the bond started failing on one side and eventually the adhesive let go on roughly half the screen.

I removed the failed adhesive and reattached the display using a black gel adhesive commonly used for phone screen replacements. It has held securely for about one month and two weeks so far.

The adhesive I received was branded Tesa. I chose it thinking it would be a cleaner option, but in the end I had to switch to the messier gel method. I originally selected it because I was also replacing the Series 7 battery, and the battery replacement works great. The screen adhesive, though, did not.

⟐ Edited by author 7月 10, 2026 at 2:08 GMT-7

⟐ Answer accepted 7月 09, 2026 at 1:15 GMT-7

⟐ Commented 7月 08, 2026 at 11:04 GMT-7

⟐ Commented 7月 05, 2026 at 1:02 GMT-7

⟐ Commented 7月 04, 2026 at 19:05 GMT-7

Has anyone successfully opened this watch and replaced the battery? If so, what tools are required, and are there any specific pitfalls (like hidden cables or fragile sensors) I should be aware of? Any advice or photos of the internals would be greatly appreciated!

⟐ Edited 7月 02, 2026 at 23:06 GMT-7

⟐ Answered 6月 30, 2026 at 1:24 GMT-7

⟐ Answered 6月 28, 2026 at 10:05 GMT-7

I ended up buying a charger clip and promised myself to post the pinout to help anyone who needs to charge it without the clip.

⟐ Commented 6月 28, 2026 at 5:06 GMT-7

⟐ Answered 6月 27, 2026 at 13:29 GMT-7

⟐ Commented 6月 27, 2026 at 10:50 GMT-7

⟐ Edited by author 6月 27, 2026 at 9:28 GMT-7

. Thanks in advance