iFixit - Answers With Device "Magic Bullet Blender"

Magic Bullet NutriBullet Pro: Nutribullet motor not activating

Wed, 24 Jul 2024 12:14:46 -0700

I have had my Nutribullet for two years and I’ve really enjoyed using it. A few days ago I noticed that it was getting a little bit finicky—I would press it down and turn it but would also have to jingle the cup around in the base to get the motor going. The motor might stop and I would have to finagle the cup in the base to get it running again.

Now, as you might have guessed, it has just completely stopped working. I put the cup into the base, press down, turn (it even makes a soft click sound), and it simply doesn’t run. To be clear, the activator tabs seem to move through their full range of motion and are NOT stuck.

I’m hoping to be able to fix this because I can’t find my proof of purchase so it won’t be elligible for any warranty.

⟐ Commented 7月 24, 2024 at 12:14 GMT-7

Magic Bullet NutriBullet: The power base is spinning but the extractor cup doesn't spin.

Thu, 22 Jun 2023 08:33:56 -0700

My NutriBullet was working fine but suddenly the extractor cup stopped spinning, though the power base base is still spinning. I removed the extractor cup and I noticed that the rubber underneath the extractor was trimmed. Where is the service center? They told me when I bought this machine it’s a lifetime warranty, can you provide me the tel.# and the location of the service center near here in Las Pinas City, Philippines.

⟐ Commented 6月 22, 2023 at 8:33 GMT-7

Magic Bullet NutriBullet: My Nutribullet RX makes a functioning noise but doesn't spin

Sat, 15 Jan 2022 11:21:45 -0700

I wanna say its the drive socket that is broken since the motor sounds like its working, however even if it is it, how would I replace the part to make it work?

⟐ Commented 1月 15, 2022 at 11:21 GMT-7

Magic Bullet MB1001B: Can I get more cups without buying an entirely new Magic Bullet?

Thu, 29 Oct 2015 09:32:53 -0700

I broke all of my cups, but I don't want to buy a whole new device. Is there anyway I can just get the cups?

⟐ Answer accepted 10月 29, 2015 at 9:32 GMT-7

Magic Bullet: Why won't my Magic Bullet crush ice?

Thu, 22 Oct 2015 09:39:41 -0700

My Magic Bullet won't crush ice, but is turned on and the blades are moving. What do I do?

⟐ Answer accepted 10月 22, 2015 at 9:39 GMT-7

Magic Bullet: Can I get more cups without buying a new Magic Bullet?

Thu, 22 Oct 2015 09:19:43 -0700

I broke all of my cups, but I don't want to buy a whole new device. Is there anyway I can just get the cups?

⟐ Answer accepted 10月 22, 2015 at 9:19 GMT-7

Nutribullet 1200W: Why is my blender not spinning

Wed, 11 Oct 2023 22:02:40 -0700

The blender turns on but the blades don't spin or do anything.

Magic Bullet NutriBullet: My NutriBullet is stuck

Tue, 22 Dec 2020 10:18:50 -0700

My bullet is stuck in the machine.

⟐ Edited 12月 22, 2020 at 10:18 GMT-7

Magic Bullet NutriBullet Pro: Why does the cap unscrews will blending causing the liquid to leak out

Fri, 16 Jan 2026 19:56:51 -0700

Why does cap unscrew while blending causing liquid to spill into base?

⟐ Commented 1月 16, 2026 at 19:56 GMT-7

Magic Bullet NutriBullet: My NutriBullet stopped working

Mon, 22 Apr 2024 01:08:39 -0700

My Magic Bullet stopped Working from one day to the next, literally. It won't hum or attempts to start, as the question above. It just won't do anything. I didn't do anything other than blending some veggies with water. Nothing different than what I have done since I bought it 8 months ago. I checked the outlet and the cord to see if there were some kind of breakage or interruption, nothing there. Everything seems to be in order, there are no visible loose or broken parts. Cannot return it since it’s been more than 6 months and I don't know what to do.

⟐ Answered 4月 22, 2024 at 1:08 GMT-7

Magic Bullet NutriBullet: 120v Nutribullet not working, ran on 220v

Thu, 07 Apr 2022 11:18:28 -0700

Bought a Nutribullet from US and accidentally ran it with 220v supply. Later bought a step down transformer and tried, it's not powering on, what could have gone wrong? Disassembled the unit and the motor windings etc look fine, is there a fuse or a reset?

Is there a wiring circuit diagram for Nutribullet? The motor windings are rated 120v, so it would not run on 230v, this would require re-winding of the motor to match the voltage.

Are the power boards sold separately?

⟐ Answer deleted 4月 07, 2022 at 11:18 GMT-7

Magic Bullet NutriBullet: Black dust during use

Sun, 28 Feb 2021 10:18:02 -0700

Hi there. When using my nutribullet black dust comes out from what appears to be under the base. There is quite a lot and it coats the entire bench and everything in the vacinity of the unit. Can I fix this. My NutriBulletRecipes is no longer in warranty

⟐ Commented 2月 28, 2021 at 10:18 GMT-7

Magic Bullet NutriBullet: My nutri bullet stopped working this morning black dust came out

Tue, 22 Dec 2020 09:30:46 -0700

Black dust came out from the bottom along with a few Sparks what can I do to make it work again.

⟐ Answer edited 12月 22, 2020 at 9:30 GMT-7

Magic Bullet NutriBullet: have I killed it with a spoon?

Wed, 25 Oct 2017 07:59:36 -0700

I was half asleep this morning and like an idiot I left a spoon in my Nutribullet cup! At first I wondered what the horrible grinding noise was but switched it off immediately noticed the rattling sound coming from the cup and discovered a teaspoon so twisted Uri Geller would be jealous. Removed the spoon and put the cup back in the bullet but the grinding noise is still there. The blades are looking a little chipped but I can see no other damage. Can I do anything to fix it?

⟐ Commented 10月 25, 2017 at 7:59 GMT-7

Magic Bullet NutriBullet Pro: How can I replace my power cord?

Tue, 05 Sep 2017 09:38:01 -0700

My power cord is not working at times. Sometimes the blender works perfectly fine, and other times the power shuts off while being used, so I do not believe it is a problem with any other components of the device.

⟐ Answered 9月 05, 2017 at 9:38 GMT-7

Magic Bullet NutriBullet Pro: smells like burnt when is workings

Wed, 16 Aug 2017 06:41:30 -0700

NutriBullet 900 w

smells like burnt when is workings. The smells is strong. the sound when is working is normal

⟐ Commented 8月 16, 2017 at 6:41 GMT-7

Magic Bullet NutriBullet: about the motor of the machine

Sat, 04 Mar 2017 17:28:13 -0700

hii im vaishali from vijayawada, Andhra pradesh...my cousin has bought me nutribullet 600w from usa to india...without using the power transformer it was run unknowingly so the motor got spoiled with sparks... can u plzz tell me the solution for it ....

can u plz let me know where can i buy it in india

⟐ Commented 3月 04, 2017 at 17:28 GMT-7

Magic Bullet NutriBullet: Where do we get the replacer parts

Wed, 12 Oct 2016 04:39:11 -0700

Where do I get the replacement parts

⟐ Answer accepted 10月 12, 2016 at 4:39 GMT-7

Magic Bullet NutriBullet: Where do I get a parts breakdown?

Sun, 19 Jun 2016 05:35:10 -0700

Hello.

I found the disassembly walk through very helpful and with my trusty meter I found out why my Nutribullet would not come on. It was the thermal protector. I swear I never run it for more than a minute, maximum three pulses. Anyway, I bypassed the thermal switch and it works again. I do know the risks and got online hunting for a replacement part. Tough going since I don't know the exact part number. I did find a nice site that helped me break down the numbers written on the part and ordered what I hope is a reasonable replacement.

Does any one have a parts breakdown with actual part numbers, manufactures, etc?

Thanks gang.

⟐ Commented 6月 19, 2016 at 5:35 GMT-7

Magic Bullet NutriBullet: Nutribullet Rx Stuck on Pulse mode

Fri, 19 Sep 2025 05:22:45 -0700

My Nutribullet Rx NB 301 suddenly stopped continuously blending and started to pulse, starting and stopping, starting and stopping until now it barely works at all.

I had been doing a nut butter but I think nuts were too hot. Still, there was no sign overheating and no smell to motor.

Activator buttons seem fine and not stuck. I let it set for a day and still no change in symptoms. What could be the issue?

The gear in the base that accepts the pitcher is quite wobbly. Could that be the issue?

⟐ Edited 9月 19, 2025 at 5:22 GMT-7