iFixit - Answers With Device "Creality Ender Series"

Creality Ender 3 Pro: 3D printer blue screen

Mon, 29 Aug 2022 03:15:23 -0700

Built printer, then it turned on. Leveled the plate to the print Nozzle with a piece of paper. I printed 2 test models then a 5 hour model. All 3 models we fine. Then turned off printer. The next day I turned the printer on and only got a Blue screen.

⟐ Answered 8月 29, 2022 at 3:15 GMT-7

Creality Ender 3 Pro: Why isn’t my printer printing correctly.

Sun, 16 Jul 2023 20:42:03 -0700

I’ve made everything leveled and every time i try to print the filament bunches up at the nozzle. I’ve had it for a month and I’ve just been struggling to actually get it going.

⟐ Answered 7月 16, 2023 at 20:42 GMT-7

Creality Ender 3 Pro: Why is my screen beeping and automatically selecting things?

Sat, 16 Nov 2024 08:02:12 -0700

I have an ender 3 pro with an skr mini v1.2 motherboard and the screen keeps automatically selecting and clicking thins and makes weird noises? Any fixes? I have all wires plugged in correctly, I’ve flashed the board, unplugged the system, removed the metal holder from around the screen, tried plugging in things differently and tried different cords but nothing has worked. Any idea for a fix?

⟐ Commented 11月 16, 2024 at 8:02 GMT-7

Ender 3 v2 Neo: My Ender 3 Max Neo Stops Extruding Filament Mid-Print

Sun, 19 Oct 2025 02:27:46 -0700

While you may be confused why I'm putting this under Ender V2 Neo, they are functionally the same device, size being the difference. Now, here's my issue, when I print the print will start off fine enough, but filament will consistently stop at about the same point each time. https://preview.redd.it/continuous-print...

More or less what happens is that the print starts off normal, and then the print simply stops at a certain point. This isn't because the filament is caught on anything, I've had this issue for a few months and taken apart a few items of the printer. I'm not sure if this is a settings issue, or if this might be an issue with the hotend, as I had to replace it, and these problems started after a few such changes.

If you have any questions you need me to clarify, I'd really like to solve this. Thanks.

⟐ Commented 10月 19, 2025 at 2:27 GMT-7

Creality Ender 3 Pro: Why isnt my 3d printer scrolling button working

Fri, 23 Feb 2024 01:54:17 -0700

Scrolling button from my 3d printer doesen"t work, is there any way I could fix that myself ?

⟐ Commented 2月 23, 2024 at 1:54 GMT-7

Ender 3 v2: after the gcode file is taken by the sim card the printer not printing

Fri, 10 May 2024 06:45:48 -0700

the file was in sim card and the 3d printer was shown the file but when i click on it it is no doing it imdly so i have to wait for a while or it should imdly work on it.

⟐ Answered 5月 10, 2024 at 6:45 GMT-7

Creality Ender 3 Pro: ender 3 pro auto leveling kit I cannot read the instalation leaflet

Sun, 17 Mar 2024 10:48:55 -0700

the instructions for my CR Touch auto leveling kit are unreadable even with my glasses on. Is there a printout available that I can download to enable me to instal this unit

⟐ Answered 3月 17, 2024 at 10:48 GMT-7

Creality Ender 3 Pro: do you do tuning

Sun, 10 Apr 2022 06:16:15 -0700

could you tune my 3d printer?

⟐ Answered 4月 10, 2022 at 6:16 GMT-7

Ender 3 v2: My ender 3 v2 only prints 2 layers then clogs up.

Sun, 22 Oct 2023 04:21:28 -0700

After the first 2 layers are printed, my ender 3 v2 plugs up. I have to pull the Boden tube, pull the filament, clean it and start over only for it to happen time after time.

⟐ Answered 10月 22, 2023 at 4:21 GMT-7

Creality Ender 3 Pro: Why isn’t my printer going up or down

Mon, 03 Jul 2023 14:27:23 -0700

The spiral part of my printer isn’t raising or lowering the printer preventing it from working what is going on

⟐ Answer unaccepted 7月 03, 2023 at 14:27 GMT-7

Creality Ender 3 Pro: Motors are no longer functioning

Sun, 24 Jul 2022 12:32:55 -0700

My 3D printer is no longer moving and makes a loud clunk noise when it attempts to move, this happened after I attempted to download south leveling firmware from the creality website, I’ve tried flashing it, and it no longer flashes, I’ve attempted to do all of the fixes presented, like the old firmware on a new SD card in plugging it and plugging it back in, but nothings working. How do I fix this issue

⟐ Answered 7月 24, 2022 at 12:32 GMT-7

Creality Ender 3 Pro: Why are my prints so innacurate and messy?

Fri, 10 Jun 2022 22:23:49 -0700

I've recently purchased an Ender 3 3d printer(not 3 pro) and have already assembled it. I have also leveled it. Though for some reason, all my prints are extrememly innacurate and messy. Why?

What it was supposed to look like:

What printed:

Of course I stopped the print before It could mess up even more. I've attempted this again and the results were similar.

Other prints also have spacings between the infill and edge

⟐ Answered 6月 10, 2022 at 22:23 GMT-7

Creality Ender 3 Pro: Why is the extruder only extruder only printing dots?

Wed, 08 Jun 2022 10:45:03 -0700

It only puts out tiny dots, an I can’t figure out why

⟐ Answer accepted 6月 08, 2022 at 10:45 GMT-7

Ender 3 V3 KE: Printer calibration starts in front of the platform

Wed, 27 May 2026 14:25:07 -0700

My printer's calibration probes in front of the platform. I reset to factory settings, the platform does click/hit the back when homing X and Y, it does go forward and back again (doesnt seem to skip while doing so)... what gives?

Ender 3 Pro and V2 32 Bit: How to fix blue screen

Mon, 30 Mar 2026 19:50:48 -0700

It was working then just got blue screen 2 of them

Ender 3 V3 KE: Heat bed is not heating as expected : CB2565

Mon, 19 Jan 2026 03:18:09 -0700

Hello, my heating bed has been failing to "heat as expected" and throws an error code of CB2565. My question is does this code need a complete bed replacement or is it usually an easy fix? Also, if i need a new print bed, will the replacement bed for the SE work, or do I need a KE bed. I'm still new to 3d printing and this is my first hardware issue since i bought this printer a year ago.

Creality Ender 3 Pro: Why is my printer not wanting to print.

Mon, 03 Nov 2025 13:06:37 -0700

I recently got a Ender. 3 pro and installed new firmware on it because I had the blank blue screen. Once I did that, I tried running a print but all it did was heat up the extruded and bed, then acted like it completed the print.

Ender 3 v2 Neo: The scroll wheel won’t work

Mon, 24 Mar 2025 15:14:54 -0700

The scroll wheel dosent do anything when turned

Ender 3 v2 Neo: z axis flashing question marks.

Tue, 31 Dec 2024 21:24:26 -0700

i just got an ender 3 v2 neo and my z axis keeps flashing question marks and auto setting to 10. i have auto homed. reconfigured, stored configuration. and attempted to move z axis with knob and nothing is working with z axis. i have even replaced x axis motor and nothing is changing. i need help. System info shows v1.1.8c

when 'moving z axis, motor will only move item upward.

⟐ Edited by author 12月 31, 2024 at 21:24 GMT-7

Creality Ender 3 Pro: How can I remove broken filament from the hose

Sat, 12 Oct 2024 22:46:12 -0700

I have a problem where the efter cannot move the filament forward and very little is coming out through the nozzle. Unfortunately the filament is broken inside the house so I cannot get out the cut off filament att the end.

Is the problem with the exrruder or the hot end or something else?