<![CDATA[iFixit - Answers With Device "Appliance"]]> https://jp.ifixit.com/Answers/Device/Appliance/All?rss=yes en-US Thu, 28 May 2026 03:10:40 -0700 <![CDATA[Roomba: 自動運転不可]]> 運転swを押すと運転が始まりますが、

近くの壁に数回激突し制御不能に。暴走？

センサー不良でしょうか？

それであれば取替は可能でしょうか。

⟐ Commented 12月 23, 2025 at 20:30 GMT-7

]]> https://jp.ifixit.com/Answers/View/931704/%E8%87%AA%E5%8B%95%E9%81%8B%E8%BB%A2%E4%B8%8D%E5%8F%AF https://jp.ifixit.com/Answers/View/931704 Tue, 23 Dec 2025 20:30:13 -0700 <![CDATA[iRobot Roomba 900 Series: じゅうでんターミナル]]> 充電ターミナルの電圧は？2.85vしかありません。本体の端子は0vバッテリーの➖端子と充電端子の導通がありません。

⟐ Answered 12月 08, 2025 at 23:18 GMT-7

]]> https://jp.ifixit.com/Answers/View/927590/%E3%81%98%E3%82%85%E3%81%86%E3%81%A7%E3%82%93%E3%82%BF%E3%83%BC%E3%83%9F%E3%83%8A%E3%83%AB https://jp.ifixit.com/Answers/View/927590 Mon, 08 Dec 2025 23:18:07 -0700 <![CDATA[SodaStream Source: 炭酸ガス注入ブロックを壊してしまいました]]> ソーダストリーム sourcev3を落としてしまい、炭酸ガス注入ブロックが押し込まれた状態で若干浮いて元に戻らなくなりました。

内部ゴムシールの交換の手順5まではできますが、手順6のブラスバーが見えず押し込めないため内部のどこが壊れているのか分かりません。

この先どのようにすれば修理できるかわかる方教えてください。

よろしくお願いします

⟐ Answer edited 11月 05, 2025 at 20:30 GMT-7

]]> https://jp.ifixit.com/Answers/View/906221/%E7%82%AD%E9%85%B8%E3%82%AC%E3%82%B9%E6%B3%A8%E5%85%A5%E3%83%96%E3%83%AD%E3%83%83%E3%82%AF%E3%82%92%E5%A3%8A%E3%81%97%E3%81%A6%E3%81%97%E3%81%BE%E3%81%84%E3%81%BE%E3%81%97%E3%81%9F https://jp.ifixit.com/Answers/View/906221 Wed, 05 Nov 2025 20:30:10 -0700 <![CDATA[Nespresso Vertuoline: Nespresso Vertuolineのライトが2回点滅、一時停止、2回点滅などを繰り返します。]]> このエスプレッソマシーンを欠陥商品として返品せずに、2回点滅するエラーを解決するにはどうしたらよいですか？

＊これは下のアンサーフォーラムページを日本語訳したものです。

Light blinking two times, pause, two times, etc..

⟐ Answer accepted 11月 07, 2022 at 18:06 GMT-7

]]> https://jp.ifixit.com/Answers/View/754845/Nespresso+Vertuoline%E3%81%AE%E3%83%A9%E3%82%A4%E3%83%88%E3%81%8C2%E5%9B%9E%E7%82%B9%E6%BB%85%E3%80%81%E4%B8%80%E6%99%82%E5%81%9C%E6%AD%A2%E3%80%812%E5%9B%9E%E7%82%B9%E6%BB%85%E3%81%AA%E3%81%A9%E3%82%92%E7%B9%B0%E3%82%8A%E8%BF%94%E3%81%97%E3%81%BE%E3%81%99%E3%80%82 https://jp.ifixit.com/Answers/View/754845 Mon, 07 Nov 2022 18:06:32 -0700 <![CDATA[Philips Pressurised Steam Generator GC8220: スチームアイロンから蒸気が出ない時の対処方法]]> 現在使っている、スチームアイロンから蒸気が出てきません。ハンドルについているスチームボタンを何度押しても出てきません。吸水口の中にはたっぷり水が入っていて、沸騰しているようですが、蒸気が出ません。どうすればよいでしょうか？

⟐ Answer accepted 12月 22, 2021 at 18:19 GMT-7

]]> https://jp.ifixit.com/Answers/View/715913/%E3%82%B9%E3%83%81%E3%83%BC%E3%83%A0%E3%82%A2%E3%82%A4%E3%83%AD%E3%83%B3%E3%81%8B%E3%82%89%E8%92%B8%E6%B0%97%E3%81%8C%E5%87%BA%E3%81%AA%E3%81%84%E6%99%82%E3%81%AE%E5%AF%BE%E5%87%A6%E6%96%B9%E6%B3%95 https://jp.ifixit.com/Answers/View/715913 Wed, 22 Dec 2021 18:19:59 -0700 <![CDATA[Keurig Coffee Maker: アップルビネガーで洗浄した後、上手く機能しません]]> 私の母は、Keurigを洗浄するのに、1/2カップ以上のアップルサイダービネガー(りんご酢)を試してみました。サイドの給水カップに水を加えたアップルサイダービネガーを注ぎました。上手く洗浄できるはずという予想を覆して、今では全く排水できません。全部掃除して、すすぎもしました。このコーヒーメーカーを救う方法はないのでしょうか？教えてください。

⟐ Answer accepted 12月 22, 2021 at 18:19 GMT-7

]]> https://jp.ifixit.com/Answers/View/715925/%E3%82%A2%E3%83%83%E3%83%97%E3%83%AB%E3%83%93%E3%83%8D%E3%82%AC%E3%83%BC%E3%81%A7%E6%B4%97%E6%B5%84%E3%81%97%E3%81%9F%E5%BE%8C%E3%80%81%E4%B8%8A%E6%89%8B%E3%81%8F%E6%A9%9F%E8%83%BD%E3%81%97%E3%81%BE%E3%81%9B%E3%82%93 https://jp.ifixit.com/Answers/View/715925 Wed, 22 Dec 2021 18:19:45 -0700 <![CDATA[Refrigerator: 冷蔵庫が冷却しない原因は何でしょうか？]]> 我が家には6年目になるlgの冷蔵庫があります。3ドアの冷蔵庫で、給水機が付いているものです。フリーザー(冷凍室)は壊れてしまったため、それ以来使っていません。冷蔵庫自体は2週間前には動いていましたが、その後、冷蔵庫内部が冷えていないことに気づきました。冷蔵庫を冷やすにはどうしたらいいですか？修理を依頼すると1万円以上かかってしまいます。自分で修理できる方法はありますか？

⟐ Answer accepted 9月 15, 2021 at 0:10 GMT-7

]]> https://jp.ifixit.com/Answers/View/705665/%E5%86%B7%E8%94%B5%E5%BA%AB%E3%81%8C%E5%86%B7%E5%8D%B4%E3%81%97%E3%81%AA%E3%81%84%E5%8E%9F%E5%9B%A0%E3%81%AF%E4%BD%95%E3%81%A7%E3%81%97%E3%82%87%E3%81%86%E3%81%8B%EF%BC%9F https://jp.ifixit.com/Answers/View/705665 Wed, 15 Sep 2021 00:10:49 -0700 <![CDATA[Maytag Stove: Glasstop electric stove F1 & F3, beeping, beeping...]]> I have an older Maytag glasstop stove (MES5770AAB). The stove top burners work fine. And the oven works some of the time. But if the top burners are used, and then the stove, sometimes it gets up to temperature, then flashes F1 or F3, and beeps until it cools off.

I've changed out the oven temperature sensor with a new one, and its still happening.

At first I thought it was the connection wires- there are two, and because the plastic connectors didn't fit (I stupidly missed the adapter piece in the bottom of the box), I had used wire caps and screwed on the two contact points.

AI (Google Gemini) went on about the wire caps not being true heat compatible wirecaps. So I went back and stripped the wires clean, and connected them with ceramic oven wirecaps, rated for 600'F. Then for good measure, I wrapped the caps in high temperature silicone tape. I then made sure none of the wires behind the oven were touching the back metal panel.

Tried the stove with the back off. IT WORKED.

Tried the top burners, then the stove. IT WORKED.

Put the back panel back on, pushed it back in the corner, and ran the stove one more time

F1, F3, beeping still.

Unplugged, plugged it back in. Ran the stove.

F1, F3, beeping again after it gets up to temperature.

I'm defeated. What in the world could this be? It seems a simple thing but I can't figure it out for anything. Has anyone seen this happen before.

⟐ Commented 5月 28, 2026 at 1:54 GMT-7

]]> https://jp.ifixit.com/Answers/View/956888/Glasstop+electric+stove+F1+&+F3,+beeping,+beeping... https://jp.ifixit.com/Answers/View/956888 Thu, 28 May 2026 01:54:14 -0700 <![CDATA[Asko Dishwasher: f2 Error code on]]> F2 error Code stay on and can’t be cleared

⟐ Commented 5月 28, 2026 at 0:16 GMT-7

]]> https://jp.ifixit.com/Answers/View/957142/f2+Error+code+on https://jp.ifixit.com/Answers/View/957142 Thu, 28 May 2026 00:16:57 -0700 <![CDATA[Appliance: My ac has no power]]> My window ac has no power

⟐ Commented 5月 28, 2026 at 0:16 GMT-7

]]> https://jp.ifixit.com/Answers/View/957144/My+ac+has+no+power https://jp.ifixit.com/Answers/View/957144 Thu, 28 May 2026 00:16:18 -0700 <![CDATA[Jura E8: How to fix milk foam]]> How to fix milk foam problem

]]> https://jp.ifixit.com/Answers/View/957133/How+to+fix+milk+foam https://jp.ifixit.com/Answers/View/957133 Wed, 27 May 2026 22:53:28 -0700 <![CDATA[Dryer: pushed button, won't come on]]> Dryer was working fine, took out a dry load, put in a wet load, punched button to start and nothing happened. check the plug, it's good.

⟐ Commented 5月 27, 2026 at 0:47 GMT-7

]]> https://jp.ifixit.com/Answers/View/117851/pushed+button,+won't+come+on https://jp.ifixit.com/Answers/View/117851 Wed, 27 May 2026 00:47:05 -0700 <![CDATA[Nutri Ninja BL450: Why does the blender get loud and smell?]]> The blender started being much louder and there is a burning smell coming out of the base. Where should I start if I want to fix it?

Should I order any parts? Or can I just maybe grease it somewhere?

⟐ Commented 5月 26, 2026 at 16:44 GMT-7

]]> https://jp.ifixit.com/Answers/View/435449/Why+does+the+blender+get+loud+and+smell https://jp.ifixit.com/Answers/View/435449 Tue, 26 May 2026 16:44:32 -0700 <![CDATA[Dyson Vacuum: Which power tool adapter works bet without interfering with function]]> Which power tool Adapter works best with the VA Tyson, without compromising the function of it like emptying i

the Castor, etc.

⟐ Answered 5月 26, 2026 at 6:34 GMT-7

]]> https://jp.ifixit.com/Answers/View/956837/Which+power+tool+adapter+works+bet+without+interfering+with+function https://jp.ifixit.com/Answers/View/956837 Tue, 26 May 2026 06:34:43 -0700 <![CDATA[lg mj3965bib: Why is it not warming up food?]]> Why is it not warming up food?

⟐ Answered 5月 26, 2026 at 6:15 GMT-7

]]> https://jp.ifixit.com/Answers/View/956827/Why+is+it+not+warming+up+food https://jp.ifixit.com/Answers/View/956827 Tue, 26 May 2026 06:15:01 -0700 <![CDATA[Ice Maker: Why it does not make ice]]> why it does not make ice

⟐ Commented 5月 25, 2026 at 15:14 GMT-7

]]> https://jp.ifixit.com/Answers/View/928576/Why+it+does+not+make+ice https://jp.ifixit.com/Answers/View/928576 Mon, 25 May 2026 15:14:37 -0700 <![CDATA[Bosch Coffee Maker: Why won’t make coffee?]]> Stream wand works but no coffee will come out! Help!

⟐ Commented 5月 25, 2026 at 14:40 GMT-7

]]> https://jp.ifixit.com/Answers/View/956750/Why+won%E2%80%99t+make+coffee https://jp.ifixit.com/Answers/View/956750 Mon, 25 May 2026 14:40:44 -0700 <![CDATA[Dyson Outsize: Keeps stopping and starting even charged]]> Keeps stopping and starting even when charged

⟐ Commented 5月 25, 2026 at 13:34 GMT-7

]]> https://jp.ifixit.com/Answers/View/956736/Keeps+stopping+and+starting+even+charged https://jp.ifixit.com/Answers/View/956736 Mon, 25 May 2026 13:34:35 -0700 <![CDATA[Kenmore Dryer: Kenmore 600 dryer won't start. Door switch?]]> I have an old Kenmore 600 series dryer, model#110.78632700. It is at least 10 years old, and could be a lot older.

It suddenly won't turn on. My first thought it might be the door switch, but the door switch is faulty but kind of works. Let me explain. If I open the dryer door and press w the metal tab on the upper right of the door, the interior light will come on, but it comes on unreliably. I have to fiddle with that metal tab, and after several attempts, the interior light will come on. My point is that the interior light does NOT come on reliably, but the interior light will come on.

So since the interior light does kind on unreliably, does this mean that the door switch is working? Or does this mean that the door switch has failed and needs replacement? Or is it something else?

I only ask this question because I don't want to order a new door switch and replace the door switch if there is no chance this will fix the problem - the problem that the dryer won't turn on anymore.

Oh, one last thing. Something specific happened when the dryer stopped starting. My wife was drying some sheets and stopped the dryer, so she could check the sheets. She did this mid-cycle. When she shot the front door and tried to start the dryer again, it would not start, and it has never started since then.

⟐ Commented 5月 25, 2026 at 12:30 GMT-7

]]> https://jp.ifixit.com/Answers/View/874943/Kenmore+600+dryer+won't+start.+Door+switch https://jp.ifixit.com/Answers/View/874943 Mon, 25 May 2026 12:30:50 -0700 <![CDATA[Midea Washing Machine: Why is my Midea Twin Tube washer's spin - dryer not working?]]> My 1 year old, 15 kg Midea Twin Tube washing machine keeps washing clothes, but the separate spin - dryer part stopped working. I can still hear (a motor?) humming, it drains, but doesn't spin.

⟐ Commented 5月 25, 2026 at 8:04 GMT-7

]]> https://jp.ifixit.com/Answers/View/956690/Why+is+my+Midea+Twin+Tube+washer's+spin+-+dryer+not+working https://jp.ifixit.com/Answers/View/956690 Mon, 25 May 2026 08:04:56 -0700