ケースと液晶パネルとの隙間が無くカッターナイフ等の刃が入りません。

本体は壊れても構いません、液晶が壊れない方法、液晶を別のWatchに使用いたいので、どなたかよい方法が有ったら教えて下さい、お願いします。

How to remove the LCD panel from the ceramiccase of the AppleWatch SE1

There is no gap between the case and the LCD panel, so a blade such as a utility knife cannot fit in.

I don't mind if the main body breaks, but I would like to know if there is a way to avoid breaking the LCD, and I would like to use the LCD on another Watch, so if anyone has a good method please let me know. Thank you.

⟐ Commented 6月 25, 2025 at 19:04 GMT-7

画面をふさぐ前に起動確認したところ、画面が映らなくなってしまいました。iPhoneでBluetooth接続はされてるのが確認出来ます。

買った画面が不良なのか？配線等を気付かないうちに損傷しているのか？

電源が入ってそうな状態でサイドボタン長押しするとバイブレーションも反応してます。

どこがダメなのか？分からないのですが、経験豊富な方で思い当たる事などあれば教えて頂けると幸いです。

⟐ Commented 11月 15, 2024 at 23:17 GMT-7

⟐ Commented 6月 18, 2026 at 1:32 GMT-7

⟐ Answered 6月 16, 2026 at 2:33 GMT-7

I have a third party band that’s stuck on my Original Apple Watch. Apple wants to charge >$200 to remove the band, which is worth far more than the watch at this point. The release button won’t press down with this band on. Is there anywhere in the San Francisco area or via mail that I can get this repaired?

Thanks

There is no visible damage. The only symptom is that the release button barely budged when trying to depress it.

The Watch, aside from the stuck band is in full working order. I would just like to get this band removed so that I can change bands again.

Thanks

⟐ Commented 6月 11, 2026 at 16:55 GMT-7

⟐ Edited 6月 02, 2026 at 18:15 GMT-7

I recently bought an Apple Watch 7000 with a broken screen off ebay and managed to get it working again, but I found out that the watch is locked with a passcode.

I’ve tried the method illustrated at Restore Apple Watch to Factory Settings (Without Passcode), but no matter where I press on the screen after holding the power button, no erase content and settings screen comes on.

Is there something that I’m doing wrong, or maybe something different I could do?

Kind Regards,

Carpe Diem

Edit: I’ve added some images of the backside of the watch

⟐ Answered 5月 29, 2026 at 10:03 GMT-7

⟐ Commented 5月 27, 2026 at 15:32 GMT-7

Ok ok I know you can buy the adhesive strips to re attach the LCD I have tried several now from different suppliers but they all fail some literally within hours.

Has as anyone found a supplier to any that actually stick it down & could you share please?

Cheers guys.

⟐ Commented 5月 26, 2026 at 0:09 GMT-7

Like I mentioned above it's the lower left connector that has a screw holding it down. I think it is a ground point but am not positive. Thanks in advance to anyone who can identify this for me.

Ken

⟐ Answer accepted 5月 20, 2026 at 16:26 GMT-7

⟐ Commented 5月 19, 2026 at 6:05 GMT-7

⟐ Edited 5月 18, 2026 at 9:29 GMT-7

⟐ Answered 5月 17, 2026 at 14:47 GMT-7

⟐ Answered 5月 13, 2026 at 14:19 GMT-7

⟐ Commented 5月 01, 2026 at 15:18 GMT-7

⟐ Commented 4月 14, 2026 at 8:25 GMT-7

⟐ Commented 4月 11, 2026 at 11:21 GMT-7

on that time I just wiped & after 1 hour I put on charge but it won’t Turing on

then I shake my watch some water drops came out

I just put nearer to fan to dry completely

does it survive or completely dead

⟐ Answered 3月 28, 2026 at 22:31 GMT-7

⟐ Commented 3月 27, 2026 at 18:16 GMT-7